120 Grit Aluminum Oxide Sandblasting Media

The environment around the equipment shall be cleaned every shift(aluminum oxide sandblasting media). The equipment shall be cleaned frequently to keep it free of dust and oil stain. The stones directly fall into the high-speed rotating rotary table from the upper part of the machine, and are separated with another part in an umbrella form under the action of high-speed centrifugal force(120 grit aluminum oxide sandblasting media). Control measures: Hang safety warning signs. 

120 Grit Aluminum Oxide Sandblasting Media MOQ: 1 Ton! 19 Years Experience 120 Grit Aluminum Oxide Sandblasting Media Supplier, 35,000m² Workshop Area, Free Samples, Fast Delivery!

If you want to buy 120 grit aluminum oxide sandblasting media, please click our products: Brown Fused Alumina or White Fused Alumina for more information!

After receiving the power-on command from the main control room of the mine washing, the operator keeps a half-arm distance from the power box, and lightly presses the button with the right index finger to start the equipment(garnet sand). Bolts at all parts shall be fastened well without looseness or missing(120 grit aluminum oxide sandblasting media). Shutdown procedure stops the clean water (return water) pump → mud pump → mud discharge pump → shaft seal pump.

The flying stones around the rotary table produce high-speed collision and high-density crushing(120 grit aluminum oxide sandblasting media). After hitting each other, the stones form eddy motion between the rotary table and the casing, and hit and crush each other for many times. Its vibration source is the motor driving the vibration exciter(white aluminum oxide 80 grit). The vibration exciter has two shafts, each shaft has an eccentric weight, and rotates in the opposite direction. 

When the environment is basically cleaned with water pipes, it is not allowed to add drinks to the motor and operation box(100 grit aluminum oxide). The foundation and support shall be firm and complete, and the connection shall be firm without looseness, fracture, corrosion and falling off. No serious distortion or inclination(120 grit aluminum oxide sandblasting media). Do a good job in shift handover and understand the equipment operation of the previous shift.

All equipment are manually shut down(black silicon carbide). All parts and components shall be complete without any missing, deformation or damage(120 grit aluminum oxide sandblasting media). The transmission V-belt shall be free of defects, overturning, slot hopping and slipping. Feeding and crushing is allowed only after the air running of the particle crusher is normal(aluminum oxide grit blasting). Impact crusher is a kind of crushing machine that uses impact energy to crush materials. 

Therefore, the blade wear is not serious, the blade connection is not loose or missing, and the blade seat is not deformed or desoldered(steel grid). The wear thickness of bevel gear and spur gear teeth shall not exceed 1 / 3 without cracks(120 grit aluminum oxide sandblasting media). The large particle ore settles at Baidi and is pushed to the tail of the tank by the rotating spiral blade and discharged from the ore discharge port to become a qualified finished ore. 

The appearance of the tank box shall be free of perforation and deformation, and the frame and fastening bolts shall be free of desoldering and looseness(aluminium oxide blasting). The hazard source of the post shall be operated after the safety is confirmed. Noise control measures: Wear earplugs as required(120 grit aluminum oxide sandblasting media). The tail shaft device has no looseness and abnormal vibration, and the lifting is flexible and reliable(corundum sand). The overflow tank is not blocked.

The slurry from the linear screen flows into the water tank from the loading port on the side of the water tank, forming a sedimentation area in the front of the water tank(green silicon carbide). Due to the continuous rotation of the screw, the slurry is continuously stirred, and small particles float on the surface and flow out of the water tank from the overflow weir(120 grit aluminum oxide sandblasting media). Failure to stabilize the up and down stairs caused the inspectors to fall and fall.

Daily maintenance (every shift), regular maintenance (every month), add and change oil to each part of the equipment according to the lubrication standard, and record it in the equipment refueling record book(glass bead blasting media suppliers). Only after receiving a shutdown command from the main control room of the mine washing plant can the machine be shut down(46 grit aluminum oxide). Control measures: and the safety protective cover removed from the clothing(120 grit aluminum oxide sandblasting media).

It uses inertia vibration exciter to generate vibration(120 grit aluminum oxide sandblasting media). Therefore, it is also called double shaft vibration screen, which is meshed by two gears to ensure synchronization(aluminum oxide abrasive blasting grit). Check the oil level of the reducer before operation; Add enough lubricating grease to the upper bearing, lower bearing and open gear of the spiral shaft(alumina sand). Too low oil level or lack of oil will lead to premature damage of the gear and bearing.

The feeding shall be uniform, and other blocks are not allowed to be added(120 grit aluminum oxide sandblasting media). Refuel all parts of the equipment according to the lubrication standard table without oil shortage, and record it in the equipment refueling record book. Improper operation of measuring bearing temperature caused injury to inspectors(pink aluminum oxide). Control measures: operate strictly in accordance with the requirements of the work instructions. 

After receiving the start command from the main control room of the mine washing, the operator keeps a half arm distance from the control cabinet, closes the power switch of the pump, and sets the working system selection switch to the "manual" position(120 grit aluminum oxide sandblasting media); closes the power switch and the working system switch Do not use too much force or too fast(aluminium oxide blast media). Irregular wear of labor insurance caused injuries to inspectors. 

Inspections near the operating parts of the thickening tank caused the inspectors to be stabbed by the thickener(alumina abrasive). Control measures: Do not approach the operating part of the thickening tank. When starting and stopping the control cabinet, the button leakage caused the operator to get an electric shock(120 grit aluminum oxide sandblasting media). Control measures: Dispose of and report to the doctor in time(aluminum oxide abrasive media). Insufficient lighting at night caused injuries to inspectors.

Control measures: increase lighting(aluminium oxide sandblasting grit). Missing or instability of the protective fence caused fall and injury to inspectors(120 grit aluminum oxide sandblasting media). Control measures: Strengthen the investigation of potential safety hazards and rectify them in a timely manner. The messy work site or slippery ground caused the inspectors to slip and fall. Control measures: standardize the placement of items and keep the site tidy(black corundum). The concentrated backwater stops.

Control measures: Correctly wear labor protection products(120 grit aluminum oxide sandblasting media). Post personnel should strictly follow the relevant requirements of the "Safety Operation Guide" and "Job Responsibilities"(aluminum oxide abrasive powder). If they need to cooperate with the maintenance personnel to operate, the maintenance personnel must provide safety notifications before they can operate, to prevent the occurrence of "three violations" and keep in mind where they are.

The equipment startup procedure on the system(aluminum oxide 80 90 grit): clean water (return water) pump, one shaft seal pump, one mud pump or: clean water (return water) pump, one shaft seal pump → mud pump, one row of mud pump, and each equipment is manually operated(120 grit aluminum oxide sandblasting media). Monitor the liquid level of the slurry pool, return pool, and dispensing pool to ensure a stable supply of medicament and prevent emptying the machine.

Other clean water pump startup procedures Open the inlet valve (exhaust in the pump body) → start the water pump → open the outlet valve(120 grit aluminum oxide sandblasting media). During the operation of the equipment, you should always pay attention to whether the readings of various meters reach the indicated value, whether the equipment is running smoothly, whether the water level of the suction pool is appropriate, and filling Is the seal intact(aluminium oxide sand)?