Home > wholesale > 150 Grit Aluminum Oxide

150 Grit Aluminum Oxide

During shutdown and maintenance, warning signs must be hung on the power switch or special personnel must be assigned for supervision(150 grit aluminum oxide). Carry out daily routine inspection of equipment according to the daily routine inspection standard and record it in the daily routine inspection record book(aluminium oxide sandblasting grit). Check whether the ore feeding is uniform and there shall be no return. Regular maintenance (monthly). 


150 Grit Aluminum Oxide MOQ: 1 Ton! 19 Years Experience 150 Grit Aluminum Oxide Supplier, 35,000m² Workshop Area, Free Samples, Fast Delivery!


If you want to buy 150 grit aluminum oxide, please click our products: Brown Fused Alumina or White Fused Alumina or Black Aluminum Oxide or Pink Corundum for more information!


Regularly check the wear of the impact plate and lining plate in the crushing bin(150 grit aluminum oxide). If serious wear is found, it must be replaced immediately to prevent accidents caused by falling off. Regular inspection shall be conducted to confirm whether there is adhesive plaster in the crushing bin. If there is adhesive plaster, it shall be cleaned in time(steel grid). Clean the equipment and site, and put the tools and instruments in order.


The brand of lubricating oil (grease) shall not be changed at will, and the lubricating oil (grease) shall be clean and free of sundries(aluminium oxide blasting). Check whether the bolts of each part are loose, tighten the loose ones and make up the defects. Check whether the blades fall off, pick out the fallen ones, and reinstall the missing blades(150 grit aluminum oxide). Check whether there is any foreign matter in the Kai box(aluminum oxide abrasive powder). If there is any, it must be picked out.


It is strictly prohibited to carry out maintenance during equipment operation(150 grit aluminum oxide). Do not flush the motor and bearing seat directly with water. Add and change oil for each part of the equipment according to the lubrication standard, and record it on the equipment refueling record book(garnet sand). The brand of lubricating oil (grease) shall not be changed at will, and the lubricating oil (grease) shall be clean and free of sundries.


Carry out daily routine inspection of equipment according to the daily routine inspection standard and record it in the daily routine inspection record book(aluminium oxide sand). Refuel all parts of the equipment according to the lubrication standard table without oil shortage, and record it in the equipment refueling record book(150 grit aluminum oxide). Check whether the bolts at each part are loose, tighten the loose ones and make up the defects(240 grit aluminum oxide blast media). 


Regularly check whether the fasteners are loose, focusing on the pressing plate screws pressing the plate hammer on both sides of the rotor, so as to prevent the two ends of the plate hammer from exposing the rotor body and hitting the machine body to damage the parts(120 grit aluminum oxide). Check whether the bolts in each part are loose, tighten the loose ones, and make up for the defects(150 grit aluminum oxide). Check whether the feed is even.


Repair or replace the damaged screen, and replace the seriously worn tensioning plate and pressing plate(aluminum oxide 80 90 grit). Check whether the ore feeding is uniform and there shall be no return. Regular maintenance (monthly). Clean the vent hole of the vibration exciter and keep the vent hole unblocked(150 grit aluminum oxide). Tighten the loose bolts, make up the damaged ones, and replace the ones with serious wear(white aluminum oxide 80 grit). Replace severely worn blades.


When cleaning the environment with water pipes, it is not allowed to drink into the motor and operation box(150 grit aluminum oxide). The discharge opening of jaw crusher and impact crusher is too large. The environment around the equipment shall be cleaned every shift. Clean the equipment frequently to keep it free of dust and oil(black silicon carbide). When cleaning the environment with water pipes, it is not allowed to drink into the motor and operation box.


Solution: Stop the machine and contact the maintenance personnel to adjust the discharge port(100 grit aluminum oxide). The crushing cavity blocks the ore. Refuel all parts of the equipment according to the lubrication standard table without oil shortage, and record it in the equipment refueling record book(aluminum oxide abrasive blasting grit). The drive belt of the impact crusher slips(150 grit aluminum oxide). Treatment method: Stop the machine and clean the impact crusher lining with a steel needle. 


Ore blockage is due to the large amount of ore, high mud content or high flow rate, and the speed of the heavy plate feeder is reduced after the machine is turned on(aluminum oxide grit blasting). The pre- and fixed jaws and anchor bolts of the granular crusher are loose or the anchor bolts of the impact crusher are loose. Solution: Stop the machine and contact the maintenance personnel to tighten the bolts(150 grit aluminum oxide). Bauxite particle size: ≤20mm.


Treatment method(150 grit aluminum oxide): Shut down, contact maintenance personnel to replace the screen(green silicon carbide). If the paint of the equipment is peeled off and rusted, it must be derusted and painted(aluminum oxide abrasive media). Clean up the residual oil in time and recycle it to a special oil drum for storage. The environment around the equipment should be cleaned up every shift and cleaned up for ore leakage(alumina abrasive). Clean the equipment frequently to keep it free of dust and oil.


It is discharged through the discharge port(150 grit aluminum oxide). When the movable particle is close to the fixed jaw, the ore located between the two jaws is crushed by crushing, splitting and bending; when the movable particle leaves the fixed jaw, the ore that has been crushed to be smaller than the size of the discharge port is under the action of gravity(aluminum oxide sandblasting media). Treatment method: stop and list, use Gangxuan to clean the crushing cavity. 


The screen of the linear vibrating screen was damaged, and large particles of ore entered the high weir type double spiral classifier(150 grit aluminum oxide). Daily inspections are carried out by the operator in each shift, and professional inspections are carried out regularly by professional inspectors(46 grit aluminum oxide). Perform daily inspection of the equipment in accordance with the daily inspection standard and record it in the daily inspection record book.


The drive belt is not grooved or dropped(150 grit aluminum oxide). Solution: Stop the machine and contact the maintenance personnel to tighten the belt. particle crusher is mainly composed of frame part, fixed jaw plate, upper guard plate, lower guard plate, movable jaw part, adjustment part, tension part, rail part, lubrication part, basic part, electric control part, etc(glass bead blasting media suppliers). Residual oil is recovered in time and stored in special oil drums. 


can be divided into two types: simple swing arc crushing mechanism and complex swing jaw crushing mechanism(alumina sand). Refuel all parts of the equipment according to the lubrication standard table, and there must be no shortage of oil, and record it in the equipment refueling record book(150 grit aluminum oxide). The brand of lubricating oil (grease) cannot be changed at will, and the lubricating oil (grease) should be clean and free of debris. 


Regular maintenance (monthly) according to the lubrication standards, refuel and change all parts of the equipment, and record it in the equipment refueling record book(aluminium oxide blast media). Tighten the loose bolts, make up for the defects, and replace the severely worn bolts(150 grit aluminum oxide). The environment around the equipment should be cleaned up every shift(corundum sand). If the paint of the equipment is peeled off and rusted, it must be derusted and painted. 


white aluminium oxide
Contact Us
  • Contact:Terry
  • Tel:0086-15515998755
  • Wechat:Wilson15515998755
  • Whatsapp:0086-15515998755
  • Email:terry@wilsonabrasive.com
Follow Us

Wilson Abrasive CO.,LTD Copyright © 2002-2021 All Rights Reserved. sitemap

Brown Fused Alumina And White Fused Alumina MOQ: 1 Ton! 19 Years Manufacturing Exprience, 35,000m² Workshop Area, Factory Price, Free Samples, Fast Delivery!

no cache
Processed in 0.982166 Second.