Home > application > 240 Grit Aluminum Oxide Wholesale Suppliers Ecuador

240 Grit Aluminum Oxide Wholesale Suppliers Ecuador

No matter the flow rate is large or small, it can reach the required pressure(black silicon carbide); the thermal efficiency is high, and the unit power consumption is small; in the daily operation of the air compressor, the oil leakage of the air compressor often occurs, and there is lubricating oil overflow on the surface(garnet abrasive). If the clearance is too large, replace the bearing bush and oil seal at the same time. 


240 Grit Aluminum Oxide Wholesale Ecuador MOQ: 1 Ton! 19 Years Experience 240 Grit Aluminum Oxide Wholesale Supplier, 35,000m² Workshop Area, Free Samples, Fast Delivery!


If you want to buy 240 grit aluminum oxide, please click our products: Brown Fused Aluminum Oxide or White Aluminium Oxide or Black Aluminum Oxide or Pink Aluminum Oxide for more information!


The main causes of oil leakage fault of air compressor are(aluminum oxide abrasive): oil seal falling off or oil leakage due to oil seal defect, oil leakage due to loose spindle, leakage of joint surface, looseness of oil inlet and return pipe joints, casting or processing defects(alumina grit). Check whether there are scratches and defects on the joint surface of oil seal and spindle, and replace those with scratches and defects.(240 grit aluminum oxide wholesale suppliers ecuador)


Standard state air compressor oil leakage fault judgment and Troubleshooting(brown fused alumina for sale): air compressor oil leakage, pay attention to observe the oil seal position, check whether the oil seal is cracked, whether the inner lip is cracked or flanged, one of the above conditions should be replaced(garnet suppliers). The working principle and main characteristics of piston compressor are as follows: working principle of piston compressor.


(240 grit aluminum oxide wholesale suppliers ecuador)The newly purchased air compressor must be replaced with new oil when it runs for 2000h for the first time(green silicon carbide), and then it shall be replaced according to the normal oil change cycle. Check the matching size of oil seal and box, and replace those that do not meet the standard(100 grit aluminum oxide media). Check the sealing condition of the joint gasket, repair or replace the gasket; check and tighten the inlet and return joint bolts and box threads.


Causes of air compressor overheating fault(aluminum oxide grit): air compressor overheating fault caused by inlet valve or unloading valve not working; air brake system leakage caused by air compressor overheating fault; insufficient oil supply and cylinder pulling at operating parts, poor cooling effect, sensor failure(steel shot abrasive). Analysis and treatment of abnormal sound fault. Move the spindle to check whether the neck clearance is too large.(240 grit aluminum oxide wholesale suppliers ecuador)


Air compressor overheat fault judgment and Troubleshooting: check the intake valve assembly when the intake is unloaded(silicon carbide abrasive). It is necessary to ensure that the minimum diameter of the oil return pipe is not twisted or bent, and the oil return pipe is smooth. Check whether the oil return pipe is smooth(80 grit aluminum oxide). If the oil return pipe is not smooth, the crankcase pressure will be too high and the oil seal will leak or fall off. 


(240 grit aluminum oxide wholesale suppliers ecuador)If the unloading valve is blocked or stuck, it should be cleaned, repaired or replaced to effectively eliminate the overheating fault of the air compressor(synthetic corundum); check the brake system parts and pipelines, poor lubrication between the piston and cylinder liner, too small clearance or cylinder pulling can cause overheating, check, repair or replace the failed parts(white fused alumina abrasives), clean and remove the stuck or replace the failure parts.


So in the process of daily use of air compressor, air compressor often appear abnormal noise(emery abrasive), such as: metal impact sound, even knock sound, friction howl of air compressor abnormal noise fault. Air compressor oil leakage, and in this case, need to check the box casting or processing defects, repair or replace defective parts(brown fused aluminum oxide manufacturers). The oil filter must be replaced at the same time when the oil is changed every time.


white aluminium oxide
Contact Us
  • Contact:Terry
  • Tel:0086-15515998755
  • Wechat:Wilson15515998755
  • Whatsapp:0086-15515998755
  • Email:terry@wilsonabrasive.com
Follow Us

Wilson Abrasive CO.,LTD Copyright © 2002-2021 All Rights Reserved. sitemap

Brown Fused Alumina And White Fused Alumina MOQ: 1 Ton! 19 Years Manufacturing Exprience, 35,000m² Workshop Area, Factory Price, Free Samples, Fast Delivery!

no cache
Processed in 1.090032 Second.