Home > technology > Aluminum Oxide 220 Grit Abrasive Manufacturers UAE

Aluminum Oxide 220 Grit Abrasive Manufacturers UAE

Sintering refers to the fused aluminium oxide process of reducing the surface of the powder particles and reducing the pore volume of the preformed body of the metal binder powder under certain external conditions and the sintering temperature below the melting point of the main components of the binder. The copper alloy that melts at high temperature in the formula is called the aluminium oxide 36 grit bonding phase.

Aluminum Oxide 220 Grit Abrasive Manufacturers UAE MOQ: 1 Ton! 19 Years Experience Aluminum Oxide Abrasive Manufacturer, 35,000m² Workshop Area, Free Samples, Fast Delivery!

If you want to buy aluminum oxide 220 grit abrasive, please click our products: Brown Fused Aluminum Oxide or White Aluminium Oxide or Black Aluminum Oxide or Pink Aluminum Oxide for more information!

During the sintering process, a series of physical and chemical changes such as volatilization of additives, black silicon carbide factory recovery and recrystallization of deformed particles, and diffusion, flow, dissolution, combination, and evolution of substances between binder particles occur. Liquid phase sintering has a fluid liquid phase, black aluminum oxide 70 grit abrasive media which can quickly fill the pores and achieve dense sintering. Even the skeleton phase softens at high temperatures.

(aluminum oxide 220 grit abrasive manufacturers uae)As a result of white fused alumina sintering, the density of the powder particles increases and the strength increases. The sintering process of the binder pre-compacted body includes a heating process, a heat preservation process at a sintering temperature, and a cooling process. According to the state of the corundum sand material phase during sintering, it is divided into fluid phase sintering and solid phase sintering. Most materials are sintered in liquid phase.

Sintering is divided into cold pressing sintering and white aluminum oxide hot pressing sintering. If the liquid phase is insufficient, if it cannot penetrate well, the density and strength of the sintered body are low. The principle of sintered metal binder formula design and design mainly considers the performance and use requirements of the designed aluminum oxide sandblasting media tool. The formula design must first determine the type and concentration of superhard abrasives.(aluminum oxide 220 grit abrasive manufacturers uae)

Cold press sintering is to first press powder metal into a high pressure with a mold, and then white corundum sinter it under normal pressure. To prevent oxidation of the powder metal, sintering is generally performed in a reducing atmosphere (hydrogen or ammonia decomposition gas) or a neutral atmosphere (nitrogen, argon). This black aluminum oxide blast media sintering process mainly relies on the liquid phase under the action of capillary forces to fill the pores to achieve densification.

Cold-pressing sintering is mainly used in the manufacture of small diamond cutting discs and diamond grinding wheels. The production volume is large, the glass bead blasting media suppliers manufacturing cost is low, but the sintering time is long. Hot pressing sintering is the most commonly used method for the production of metal bonded superhard abrasive tools. Under the pink fused alumina condition of hot pressing, the formed liquid phase is forced to penetrate under pressure.

(aluminum oxide 220 grit abrasive manufacturers uae)Plastic deformation occurs under pressure, steel grid resulting in 100% densification of the product in a short time, the wettability is not good, and it is easy to ensure the sintering quality of the hot-pressed product. Figure 2-14 shows the production process (including cold pressing method and hot pressing method) of sintered metal bonded superhard abrasive tools. Fine-grained, low-concentration (dosage) chrome corundum are suitable for fine grinding.

Different grades of superhard abrasives are suitable for pink alumina processing different workpiece materials. Before coarse grinding and large removal rate, coarse-grained and high-concentration abrasives should be used. Secondly, it is necessary to determine the reasonable ratio of the components of the binding agent, the types and black fused alumina properties of the binding agent and the abrasive, and the composition and performance of the binding agent.(aluminum oxide 220 grit abrasive manufacturers uae)

white aluminium oxide
Contact Us
  • Contact:Terry
  • Tel:0086-15515998755
  • Wechat:Wilson15515998755
  • Whatsapp:0086-15515998755
  • Email:terry@wilsonabrasive.com
Follow Us

Wilson Abrasive CO.,LTD Copyright © 2022 All Rights Reserved.

Brown Fused Alumina And White Fused Alumina MOQ: 1 Ton! 19 Years Manufacturing Exprience, 35,000m² Workshop Area, Factory Price, Free Samples, Fast Delivery!

no cache
Processed in 1.276750 Second.