Home > application > Brown Aluminium Oxide 60 Grit Manufacturers Europe

Brown Aluminium Oxide 60 Grit Manufacturers Europe

The position of the light source and the condensing light should be adjusted when taking pictures(brown aluminium oxide), so that the light beam can be injected into the center of the entrance of the direct illuminator at a good price, so that the brightness of the obtained image can be overlaid evenly(aluminum oxide blasting). The photo paper stays in the fresh fixing solution for about 15 minutes. In the capacitor, there is a special structure called electrolytic capacitor.


Brown Aluminium Oxide 60 Grit Manufacturers Europe MOQ: 1 Ton! 19 Years Experience Brown Aluminium Oxide Grit Manufacturer, 35,000m² Workshop Area, Free Samples, Fast Delivery!


If you want to buy brown aluminium oxide 60 grit, please click our products: Brown Fused Aluminum Oxide for more information!


The general star shadow temperature is about 20℃(glass beads manufacturers). The fixing temperature should be below 23℃, and the time that the film stays in the fixing solution is generally 20~30min. Stay in an aqueous solution of 2% chromium sulfur and 2% acid sulfurous acid for 3 to 5 minutes(white aluminium oxide grit). The diameter of the ordinary picture is 80mm, which is the same size as the inspection surface, when the 0.8mm field of view is 100 times larger.(brown aluminium oxide 60 grit manufacturers europe)


When observing under a microscope, first use 50~100 times(brown aluminum oxide); when it comes to observing the unloaded microstructure, switch to a high-power microscope. If the room temperature exceeds 23°C, in order to avoid softening of the negative film, it can be hardened and hand restrained before fixing. During development and fixation of Lian films, those with lactamine must be upward(white aluminium oxide blasting media). If necessary, use xylene to scrub.


(brown aluminium oxide 60 grit manufacturers europe)When waiting for the light, you should be careful not to be too short or too long, so that the fine shadow lines on the darker part of the film can be clearly displayed(garnet abrasive price). According to the type of photo paper, choose the appropriate shadow solution. And adjust the distance of the microscope to make the shadow on the glass plate clear and clear(brown aluminum oxide grit). If necessary, you can use a coalescing magnifier to observe on the ground glass plate.


The development time is generally about 1 min(pink corundum). After development, the photo paper can be slightly immersed in an aqueous solution containing 1.5% koshen acid to neutralize the effect of alkaline development and stop the development. Then, when the photo paper is poured into the fixing solution, the latex surface will be uniform(glass bead abrasive). The sample size is 20mm×10mm, which is cut from the inspection surface of the steel (or pot blank).(brown aluminium oxide 60 grit manufacturers europe)


It must be upwards and completely immersed in the solution(black corundum). The aperture system (i.e. aperture) of the microscope must be adjusted to an appropriate size to make the phase seen by the microscope clearest. If the old fixing solution can be used to extend the time, the fixed photo should be rinsed in flowing water for more than 1 hour, or rinsed 12 times in rotating water(brown aluminum oxide sand), each time About 5 minutes, dry after the war.


(brown aluminium oxide 60 grit manufacturers europe)The test record should include the history of the sample, the location of the sample(brown fused alumina), the chemical composition, the type of disease and the description of the organization, etc., such as the magnification instruction and the type of etchant should be indicated when taking pictures(white fused alumina micro powder). When the lens surface is dirty, you should first use a soft brush with fat-free feathers, then wipe it with lens cleaning paper or soft deerskin.


The inspection standard for non-metallic inclusions in steel that has undergone extensional deformation is(white aluminium oxide): GB10561-89 "Microscopic Evaluation Method for Non-metallic Inclusions in Steel". The film must be completely immersed in Luodu and be moved frequently(steel shot abrasive). Choose the appropriate developing temperature and time according to the type of film, and it should be carried out in accordance with the specifications of the film.(brown aluminium oxide 60 grit manufacturers europe)


white aluminium oxide
Contact Us
  • Contact:Terry
  • Tel:0086-15515998755
  • Wechat:Wilson15515998755
  • Whatsapp:0086-15515998755
  • Email:terry@wilsonabrasive.com
Follow Us

Wilson Abrasive CO.,LTD Copyright © 2002-2021 All Rights Reserved. sitemap

Brown Fused Alumina And White Fused Alumina MOQ: 1 Ton! 19 Years Manufacturing Exprience, 35,000m² Workshop Area, Factory Price, Free Samples, Fast Delivery!

no cache
Processed in 1.241189 Second.