Home > application > Brown Aluminium Oxide 60 Grit Suppliers Switzerland

Brown Aluminium Oxide 60 Grit Suppliers Switzerland

Take 100 ml of water sample, add a few drops of coric acid, drop 1 to 2 drops of 1% nitric acid eye solution, and shake well. No white turbidity is qualified(brown aluminium oxide). Moisture. Therefore, it is generally dried at a high temperature of 60-5C for 2 hours, which can completely remove the moisture in the core(silicon carbide grit). Because of the double-tank structure, the electrolyte can circulate between the two tanks, with less pollution and high efficiency.

Brown Aluminium Oxide 60 Grit Suppliers Switzerland MOQ: 1 Ton! 19 Years Experience Brown Aluminium Oxide 60 Grit Supplier, 35,000m² Workshop Area, Free Samples, Fast Delivery!

If you want to buy brown aluminium oxide 60 grit, please click our products: Brown Fused Aluminum Oxide for more information!

Take 100 ml of water sample, add 1 ml of 1% barium chloride solution, and shake well(white aluminum oxide). In each test item, as the deionized water used for aluminum electrolytic capacitors, the main test parameters in actual production are the resistivity, chloride, pH, and sulfate of the deionized water, followed by iron ions, and the test results should meet the requirements value(60 grit aluminum oxide). The wick absorbs the working electrolyte by the adsorption of porous electrolytic paper.(brown aluminium oxide 60 grit suppliers switzerland)

Core impregnation is also known as impregnation, which means that the core is not covered with working electrolyte(white fused alumina). If the solution is red, it means Ca* is present, and if it is blue, it is qualified. Take 10 ml of water sample, add a few drops of ammonia buffer solution (pH=10) and 0.5% of complex black T indicator solution 2~3 drops, shake well, if the solution is red, and it is sky blue It is qualified(black silicon carbide). The current vacuum immersion equipment is shown in the figure.

(brown aluminium oxide 60 grit suppliers switzerland)Tests have shown that the core can remove more than 75% of the moisture in the core at a constant temperature of 65°C for half an hour(white alumina), and more than 93% of the water can be removed if the core is held at a constant temperature for 1 hour. If the core is held at a constant temperature of 85°C for half an hour, it can remove all of it. There are usually two riveting methods: one is cold riveting, and the other is ultrasonic riveting(white fused aluminium oxide). The core must be dried before immersion.

The dried core is immersed in the working electrolyte preheated to a temperature of 50C(black corundum), and left for a certain period of time, so that the electrolyte completely soaks the core. The advantages of this method are simple and convenient, and the equipment is simple(aluminum oxide grit). The disadvantage is that the heating and electrolysis in the immersion Liquid, it is easy to cause the volatilization of moisture in the electrolyte, and the invasion time is longer, and air will remain in the middle of the core.(brown aluminium oxide 60 grit suppliers switzerland)

Therefore, this method is currently the most commonly used method(pink corundum). The inside of the core is often impenetrable by vacuum impregnation. For this reason, a few atmospheres can be added to the vacuum tank for forced pressure impregnation so that the inside of the core can be fully impregnated and the immersion time can be shortened(garnet abrasive).  From this point of view, the pressure dip method is the best, followed by the vacuum diffuse method.

(brown aluminium oxide 60 grit suppliers switzerland)Distilled water for chemical analysis is usually obtained through one distillation (ie, one-time water). The analysis of high-purity substances must use high-purity water(green silicon carbide). For this reason, multiple distillations can be used to slow down the distillation speed. The electrolyte must completely soak the electrolytic paper and penetrate into the fine corrosion pits of the anode(garnet suppliers). If it is not fully soaked, it means that Mg* is present, the capacitance will decrease and the gd will increase.

white aluminium oxide
Contact Us
  • Contact:Terry
  • Tel:0086-15515998755
  • Wechat:Wilson15515998755
  • Whatsapp:0086-15515998755
  • Email:terry@wilsonabrasive.com
Follow Us

Wilson Abrasive CO.,LTD Copyright © 2002-2021 All Rights Reserved. sitemap

Brown Fused Alumina And White Fused Alumina MOQ: 1 Ton! 19 Years Manufacturing Exprience, 35,000m² Workshop Area, Factory Price, Free Samples, Fast Delivery!

no cache
Processed in 0.950758 Second.