Home > application > Brown Aluminium Oxide For Refractory Suppliers Germany

Brown Aluminium Oxide For Refractory Suppliers Germany

The titanium content is related to the service conditions of high manganese steel(black silicon carbide powder). Under the condition of high impact and chiseling abrasive wear, lower titanium content is suitable. Under the condition of low stress and low impact abrasive wear, the steel with high titanium content has better effect(aluminum oxide 80-90 grit). Therefore, the optimum content of titanium depends on the specific conditions.


Brown Aluminium Oxide For Refractory Suppliers Germany MOQ: 1 Ton! 19 Years Experience Brown Aluminium Oxide Supplierr, 35,000m² Workshop Area, Free Samples, Fast Delivery!


If you want to buy brown aluminium oxide for refractory, please click our products: Brown Fused Aluminum Oxide for more information!


The results show that the austenite particles in high manganese steel can be refined effectively and the network carbide in the as cast structure can be reduced(carborundum grit suppliers). With the addition of button, under the condition of high impact abrasive wear, low titanium content can refine the microstructure grains(80 grit aluminum oxide for cerakote), increase the dislocation density and improve the work hardening ability.(brown aluminium oxide for refractory suppliers germany)


At the same time, a small amount of high hardness particles are dispersed on the matrix(white alumina), which increases the wear resistance of high manganese steel; Under the condition of low stress and low impact abrasive wear, there are more second phase particles with high hardness in the metal matrix(carborundum powder suppliers). When the high manganese steel is filled, the content of W (NB) is generally controlled below 0.2%.


Nb4cg exists in austenite grain boundary, which hinders atom diffusion and prevents austenite grain coarsening during solution treatment(green silicon carbide powder). The results show that the wear resistance of high manganese steel after adding aluminum is very good, which is related to the formation of a large number of dispersed carbides in the high manganese steel(aluminum oxide 40/60 grit). It is difficult to completely dissolve in austenite during solution treatment.


(brown aluminium oxide for refractory suppliers germany)Vanadium can effectively refine the grain size and increase the carbide hard point(black corundum), so that the eye bending strength of high manganese steel is significantly improved, but the plasticity is decreased. At the same time, the hardness and impact toughness of high manganese steel are improved by adding sails(white aluminium oxide grains). The tensile strength and plasticity of the steel decrease with the increase of the content, but the yield strength changes little.


The energy promotion promotes the strengthening of high manganese steel(carborundum powder), and the strength, especially the yield strength, is significantly increased. V (V) in high manganese steel is generally controlled at about 0.5%. This effect is closely related to its enrichment at grain boundary and strengthening effect on product boundary(aluminum oxide 1000 grit). It can be said that vanadium is an effective grain refiner for high manganese steel.(brown aluminium oxide for refractory suppliers germany)


Therefore, it precipitates on the grain boundary, which can prevent the atomic diffusion of the product boundary(pink corundum), inhibit the grain boundary movement, and prevent the austenite grain growth during high temperature solution treatment. The hardness of the surface hardened layer on the residue of excavator tooth reflects the work hardening ability of the steel(abrasive grade aluminum oxide), which can also improve the wear resistance of the material.


(brown aluminium oxide for refractory suppliers germany)When the content of W (b) reaches 0.05%(alumina polishing powder), the brittle eutectic structure containing iron turnover appears, which leads to the failure along the grain boundary of high manganese steel under stress, and reduces the impact toughness of high manganese steel. Palladium is a strong carbide forming element in steel, and carbide exists in the form of NBCA in steel(aluminum oxide 500 grit). It can also form NbN or Nb (CN) compound with ammonia in steel.


white aluminium oxide
Contact Us
  • Contact:Terry
  • Tel:0086-15515998755
  • Wechat:Wilson15515998755
  • Whatsapp:0086-15515998755
  • Email:terry@wilsonabrasive.com
Follow Us

Wilson Abrasive CO.,LTD Copyright © 2001-2020 All Rights Reserved. sitemap

Brown Fused Alumina And White Fused Alumina MOQ: 1 Ton! 19 Years Manufacturing Exprience, 35,000m² Workshop Area, Factory Price, Free Samples, Fast Delivery!

no cache
Processed in 0.965067 Second.