Home > technology > Brown Aluminum Oxide 120 Grit Blast Media Turkey

Brown Aluminum Oxide 120 Grit Blast Media Turkey

The more the CO content is, the higher the CO content will cause the electrolyte to agglomerate(arc fused alumina). Because the solubility of NACO is lower than that of na0h, the alkali roller should be replaced when the content of NACO in alkali liquor exceeds a certain value. Lye should be avoided exposure to the air as far as possible, so as to prolong the service life of lye(aluminium oxide grit 24 mesh). The electrolyzer does not work continuously, so there will be some faults in use.


Brown Aluminum Oxide 120 Grit Blast Media Turkey MOQ: 1 Ton! 19 Years Experience Brown Aluminum Oxide Manufacturer, 35,000m² Workshop Area, Free Samples, Fast Delivery!


If you want to buy brown aluminum oxide 120 grit blast media, please click our products: Brown Fused Aluminum Oxide for more information!


Sometimes there are several reasons at the same time(green carborundum), for example, the blockage of the air outlet will lead to the gas pressure difference in the chamber, so that the pomegranate diaphragm can not play the role of pressure, and the phenomenon of decoration and perforation occurs. If the temperature rises to 95 ℃, it must be shut down and stop working. After troubleshooting, start-up should be carried out in order(black silicon carbide factory). When the preparations are in place, no analysis can be carried out. 


(brown aluminum oxide 120 grit blast media turkey)Power failure or rectification device failure will cause the work interruption of the electrolytic cell(black aluminum oxide). At this time, the valves of quick connection electrolyzer and gas storage should be closed, and the vent valve should be opened to let the gas be discharged into the atmosphere. When the cooling water stops, it is necessary to pay attention to the temperature of the electrolyte(aluminium oxide 36 grit). When the electrolyzer is working, the phenomenon of gas ground degree decreasing often occurs.


When the purity of the gas is qualified, it can be sent into the gas storage(white aluminium oxide). The main reason for the decrease of oxygen ground level is the internal mechanical pollution caused by various abnormal conditions in operation, and the electrochemical pollution caused by the electrochemical process. In general, the decrease of oxygen purity is more than that of hydrogen, because the decrease of hydrogen purity is only caused by mechanical pollution(aluminum oxide for sand blaster). The electrochemical effect can be measured by voltmeter.


The causes of mechanical pollution are as follows(brown fused alumina): large gas pressure difference in the chamber; diaphragm damage, perforation or load pattern; main cross plate burning out; electrolytic liquid level of the chamber drops, and a gas outlet is blocked. But some faults are caused by the change of external conditions, such as power failure and water supply(high purity fused aluminum oxide). In order to avoid and slow down this effect, potassium dichromate can be added into the electrolyte.(brown aluminum oxide 120 grit blast media turkey)


There are two reasons for the electrochemical pollution(brown aluminum oxide): one is that it mainly occurs after the electrolyzer has been working for a period of time (generally after 10 months), and the diaphragm frame of the electrolytic cell gradually enters into the electrochemical work, which makes the iron in yinei form ferrous acid ions and enter into the electrolyte(aluminum oxide 220 grit abrasive). The rise of the electric music in the electrolytic cell is also one of the common faults of the electrolytic cell.


(brown aluminum oxide 120 grit blast media turkey)If the temperature rises rapidly, the load needs to be reduced(brown aluminium oxide). The other is that the asbestos diaphragm frame is loose and attached to the cathode after use, resulting in the single pole operation of the electrode plate. In normal operation, the total voltage on the diaphragm frame is in the range of 0.8 ~ 0.8 v. if it enters into electrochemical operation, it will be reduced to below 0.5 v(aluminum oxide 40 grit). when the cathode is short circuited, the voltage will be zero.


white aluminium oxide
Contact Us
  • Contact:Terry
  • Tel:0086-15515998755
  • Wechat:Wilson15515998755
  • Whatsapp:0086-15515998755
  • Email:terry@wilsonabrasive.com
Follow Us

Wilson Abrasive CO.,LTD Copyright © 2001-2020 All Rights Reserved. sitemap

Brown Fused Alumina And White Fused Alumina MOQ: 1 Ton! 19 Years Manufacturing Exprience, 35,000m² Workshop Area, Factory Price, Free Samples, Fast Delivery!

no cache
Processed in 1.260890 Second.