Home > application > Brown Aluminum Oxide 250 Grit Manufacturers USA

Brown Aluminum Oxide 250 Grit Manufacturers USA

During the installation, the safety and quality of the brown fused alumina manufacturer grinding wheel must be inspected first. The method is to tap the side of the grinding wheel with a nylon hammer (or a pen), but the sound is clear and crisp. The location of the grinding machine is the first problem to be considered in the installation process. Only when a reasonable and arc fused alumina appropriate location is selected can we carry out other work.


Brown Aluminum Oxide 250 Grit Manufacturers USA MOQ: 1 Ton! 19 Years Experience Brown Aluminum Oxide Manufacturer, 35,000m² Workshop Area, Free Samples, Fast Delivery!


If you want to buy brown aluminum oxide 250 grit, please click our products: Brown Fused Aluminum Oxide for more information!


It is forbidden to install the black corundum grinding wheel machine in the place directly facing the nearby equipment and operators or where people often pass by. If the special grinding wheel machine room cannot be set due to the limitation of the plant terrain, a protective baffle plate with a height of not less than 1.8m shall be installed on the front of the silicon carbide companies grinding wheel machine, and the baffle plate shall be firm and effective.


The unbalance of brown fused alumina grinding wheel is mainly caused by the inaccurate manufacture and installation of grinding wheel, which makes the center of gravity of grinding wheel not coincide with the rotating axis. On the one hand, when the fused alumina grinding wheel rotates at high speed, it will cause vibration, which is easy to cause polygonal vibration marks on the workpiece surface. The protective cover is the most important protective device of grinder. 


On the other hand, the unbalance accelerates the vibration of the main shaft and the wear of the bearing, pink corundum which will cause the fracture of the grinding wheel and even the accident. The screen plate is one of the main protective accessories of the grinder, and the opening of the protective cover above the horizontal plane of the main black oxide aluminum shaft is more than or equal to 30 (this device must be set when necessary). 


Therefore, it is required that the brown aluminum oxide sand office building with a large diameter greater than or equal to 200 mm should be statically balanced first after being installed with a chuck, and the grinding wheel should be statically balanced repeatedly after being shaped and trimmed or when it is found that it is unbalanced in the work, such a situation will occur. Matching problem mainly refers to the installation of chuck and glass beads supplier grinding wheel.


In this way, there is a matching problem between the chuck and the grinding wheel, otherwise silicon carbide price, "big horse pulling small car" causes waste of equipment and materials; "small horse pulling big car" does not meet the safety requirements, which is easy to cause personal accidents. When replacing the new low density white alumina grinding wheel, the installation of the protective cover shall be firm and reliable, and the protective cover shall not be removed or discarded at will.


Therefore, the reasonable matching of chuck and grinding wheel, on the one hand, brown aluminium oxide can save equipment and cut materials; on the other hand, it can meet the requirements of safe operation. In addition, a cushion with a diameter of 2mm larger than the chuck diameter and a thickness of 1mm-2mm shall be added between the 1200 grit aluminum oxide grinding wheel and the chuck. Generally, a special grinding wheel machine room shall be set up in the large workshop. 


Its function is to effectively cover the debris of grinding wheel and ensure the safety of personnel when the green carborundum grinding wheel is damaged due to some reasons. The shape of the protective cover of grinding wheel can be divided into round and square, and the maximum opening angle is not allowed to exceed 90 °; the aluminum oxide blast media 60 grit material of the protective cover is steel with tensile strength not less than 415n / mm2.


Its main function is to shield the flying in the white alumina grinding process, so as not to hurt the operators. It shall be installed at the front end of the opening of the protective cover, the width of which shall be larger than that of the protective cover of the grinding wheel, and it shall be firmly fixed on the protective cover. In addition, the clearance between the peripheral surface of the 46 grit aluminum oxide grinding wheel and the baffle plate shall be less than 6mm.


white aluminium oxide
Contact Us
  • Contact:Terry
  • Tel:0086-15515998755
  • Wechat:Wilson15515998755
  • Whatsapp:0086-15515998755
  • Email:terry@wilsonabrasive.com
Follow Us

Wilson Abrasive CO.,LTD Copyright © 2001-2020 All Rights Reserved. sitemap

Brown Fused Alumina And White Fused Alumina MOQ: 1 Ton! 19 Years Manufacturing Exprience, 35,000m² Workshop Area, Factory Price, Free Samples, Fast Delivery!

no cache
Processed in 3.600776 Second.