Home > News > Brown Fused Alumina Grit Manufacturers UK

Brown Fused Alumina Grit Manufacturers UK

Used to improve the polishing performance of aluminum oxide abrasive tools, such as molybdenum disulfide, graphite powder, refined naphthalene, table salt, pumice stone, polyethylene hollow balls, etc. glass bead blasting media suppliers used to improve the grinding efficiency, such as cryolite powder, pyrite powder, fluorosilicic acid Sodium (potassium), oxides, sulfides, etc. 

Brown Fused Alumina Grit Manufacturers UK MOQ: 1 Ton! 19 Years Experience Brown Fused Alumina Manufacturer, 35,000m² Workshop Area, Free Samples, Fast Delivery!

If you want to buy brown fused alumina grit, please click our products: Brown Fused Aluminum Oxide for more information!

The function of the wetting agent is to wet the brown fused alumina before mixing it into the molding material, and then mix the material to maintain the wet strength of the green body. Common wetting agents are ethanol, water, motor oil, kerosene, etc. The general dosage is 0.1% ~ 0.8%, and the strength of the abrasive tool can be increased by 10% ~ 30%, the combined dosage of SiC abrasives is more than that of green silicon carbide.(brown fused alumina grit manufacturers uk)

Plasticizer is used to reduce the glass transition temperature of resin, increase fluidity, and improve the toughness of brown aluminum oxide tools. Dibutyl phthalate, polyamide, liquid glue, etc. are commonly used. The coupling agent is to promote the formation of a chemical bond between the bonding agent and the adhered aluminum oxide grit, and improve the bonding strength. Commonly used coupling agents are Volan, A-151, KH-550, KH-590, B201, B202.

(brown fused alumina grit manufacturers uk)Ordinary resin abrasives refer to resin abrasives of corundum and silicon carbide abrasive. The formula design of the resin binder is to determine the proportional relationship among the set abrasives, abrasives, binders, fillers and auxiliary materials. The mass of abrasive is 100 parts, and the other materials are expressed as a percentage of the synthetic corundum and the total mass of the raw materials of each component of the abrasive tool is 100 parts.

The basic elements of ordinary resin abrasives are the type and size of brown aluminium oxide, abrasive hardness, combined dosage, abrasive structure, forming density or pressure. Under the same conditions, the combined dosage of mixed particle size is less than that of single particle size. Especially for high-strength black silicon carbide, increasing the forming density is more effective than adjusting the combined dose, and the percentage of each raw material is the total mass.

(brown fused alumina grit manufacturers uk)The relationship between the type of white alumina and the combined dosage: the relationship between the particle size of the abrasive and the binding agent; the relationship between the forming density and the hardness of the abrasive article; the relationship between the combined dosage and the hardness of the emery abrasive article. Under the same conditions of particle size and forming density, to make abrasives of the same strength level.

When the strength (or hardness), type of black corundum, and forming density (or pressure) of the abrasive are the same, the combined dosage increases with the increase of the abrasive particle size number, that is, the finer the abrasive, the more binder is required. In the case of the same type of abrasive, particle size and forming density, increasing the combined dose can improve the strength and hardness of the garnet abrasive tool.(brown fused alumina grit manufacturers uk)

Grit size determines the roughness and grinding efficiency of the pink corundum surface being machined. The basic rule for the formulation of resin abrasive tools is to control well: in the case of the same type of abrasive, particle size and combined dosage, as the forming density increases, the hardness and strength of the abrasive tools also increase. Adjusting the forming density is the main method for adjusting the hardness and strength of the garnet suppliers abrasive tool.

white aluminium oxide
Contact Us
  • Contact:Terry
  • Tel:0086-15515998755
  • Wechat:Wilson15515998755
  • Whatsapp:0086-15515998755
  • Email:terry@wilsonabrasive.com
Follow Us

Wilson Abrasive CO.,LTD Copyright © 2002-2021 All Rights Reserved. sitemap

Brown Fused Alumina And White Fused Alumina MOQ: 1 Ton! 19 Years Manufacturing Exprience, 35,000m² Workshop Area, Factory Price, Free Samples, Fast Delivery!

no cache
Processed in 1.060874 Second.