Home > technology > Cheap 180 Grit Aluminum Oxide Suppliers India

Cheap 180 Grit Aluminum Oxide Suppliers India

If it is not good, it is easy to break the black synthetic corundum grinding wheel or cause dark lines when installing the card, and it will break when rotating. Circular run out tolerance for some grinding wheels, such as slice grinding wheel for cutting and grinding, coin shaped aluminium oxide abrasive grit grinding wheel, grinding head and other grinding wheels, the national standard also requires the measurement of circular run out.


Cheap 180 Grit Aluminum Oxide Suppliers India MOQ: 1 Ton! 19 Years Experience Brown Aluminium Oxide Manufacturer, 35,000m² Workshop Area, Free Samples, Fast Delivery!


If you want to buy cheap 180 grit aluminum oxide, please click our products: Brown Fused Aluminum Oxide or White Aluminium Oxide or Black Aluminum Oxide or Pink Aluminum Oxide for more information!


According to national standards GB / t2190-2003 and GB / t2491-2003, for aluminum oxide for sand blaster tools with grain size of f36-f150, the hardness shall be measured by sandblasting hardness tester: for abrasive tools with grain size of f180-f1200, the hardness shall be measured by Rockwell hardness tester; for abrasive tools with coarse grain size, small grinding head, small grinding wheel and other abrasive tools that cannot be measured by black alumina sandblasting hardness tester or Rockwell hardness tester.


It is usually measured by hand cone method or other brown aluminium oxide methods, but it must be compared with the hardness block of standard grinding wheel. The working principle of sandblasting hardness tester is to spray a certain amount of standard quartz sand (with a certain shape and particle size range) on the fused aluminum oxide surface of abrasive tools by using air with a certain pressure, so that the surface of abrasive tools will form a pit under the impact of quartz sand.


The depth of the pit indicates the hardness of the abrasives. The deeper the pit, the softer the hardness of the high purity fused aluminum oxide. The operation of the sandblasting hardness tester is divided into several procedures, such as zero position, air supply, sand supply, pit depth measurement, etc. the specific operation requirements are as follows: During the measurement, the end face of the tripod shall be in full contact with the aluminium oxide blasting grit surface of the abrasive tool.


When correcting the glass plate value, the scale "zero position" shall be aligned. At least 5 points shall be measured on the brown fused alumina glass plate every time. For 28cm sand chamber, the glass value is 2.13mm soil 0.5mm; for 5cm sand chamber, the glass value is 0.53mm ± 0.03mm. After the quartz sand is completely ejected from the sand chamber, the machine head shall continuously press the surface of the artificial corundum grinding tool to read out the measured pit depth.


The aluminium oxide sandblasting measurement principle of Rockwell hardness method is to press the steel ball into the sample surface under the successive action of preload and main load. There are two methods to check the hardness of abrasive tools: hand cone method and hardness tester method. Commonly used hardness machines include aluminum oxide blasting abrasive sandblasting hardness machine, Rockwell hardness machine, mechanical cone (large and impact type), audio hardness machine, etc. 


After the end of the total load, the hardness is expressed by the difference between the brown aluminum oxide pressing depth of the steel ball and that of the preload when the main load is removed and the preload is retained. The measurement of dynamic modulus is a new method for measuring the hardness of abrasive tools. The pink aluminium oxide coarse abrasive tools can be partly solved by audio method. In the process of operation, the standard glass plate shall be frequently used for correction.


white aluminium oxide
Contact Us
  • Contact:Terry
  • Tel:0086-15515998755
  • Wechat:Wilson15515998755
  • Whatsapp:0086-15515998755
  • Email:terry@wilsonabrasive.com
Follow Us

Wilson Abrasive CO.,LTD Copyright © 2001-2020 All Rights Reserved. sitemap

Brown Fused Alumina And White Fused Alumina MOQ: 1 Ton! 19 Years Manufacturing Exprience, 35,000m² Workshop Area, Factory Price, Free Samples, Fast Delivery!

no cache
Processed in 1.528554 Second.