Home > News > Cheap Aluminum Oxide 1000 Grit Producers Belgium

Cheap Aluminum Oxide 1000 Grit Producers Belgium

The oil removal principle is based on cavitation(white fused alumina). When the workpiece is placed in the deoiling fluid and the degreasing process is under the action of ultrasonic field with a certain frequency. The shock wave can scour the surface of the workpiece and promote the peeling of oil film(synthetic corundum). Electrolytic oil removal fluid is the same as alkaline chemical oil removal fluid, but mainly relies on electrolysis to enhance the oil removal effect. 


Cheap Aluminum Oxide 1000 Grit Producers Belgium MOQ: 1 Ton! 19 Years Experience Aluminum Oxide Grit Manufacturer, 35,000m² Workshop Area, Free Samples, Fast Delivery!


If you want to buy cheap aluminum oxide 1000 grit, please click our products: Brown Fused Aluminum Oxide or White Aluminium Oxide or Black Aluminum Oxide or Pink Aluminum Oxide for more information!


When the ultrasonic wave acts on the deoiling liquid, due to the transmission of pressure wave(white aluminum oxide), the solution is subjected to negative stress at a certain moment, and then it is subjected to positive stress in the next instant. After repeated positive and negative stress, each filter has 17 filter elements, a strong shock wave is generated(garnet abrasive). After electrolytic deoiling treatment, two water are used for countercurrent washing.(cheap aluminum oxide 1000 grit producers belgium)


Ultrasonic enhanced oil removal is to take advantage of the damage(white corundum), tearing and dispersion of oil film caused by shock wave and strong stirring effect caused by cavitation phenomenon. Electrolytic degreasing is a process in which the parts are used as cathode or anode in alkaline solution(emery abrasive), and stainless steel plate and zinc plate are used as the second electrode to remove oil on the surface of parts under the action of direct current.


(cheap aluminum oxide 1000 grit producers belgium)After the workpiece passes through the acid pickling tank, the counter current water is used to wash the workpiece(silicon carbide abrasive). Generally, electrolytic oil removal is more effective, faster and more thorough than chemical oil removal. After washing, the water is neutralized with acid, which is neutralized by 2% dilute hydrochloric acid, and then it is washed with water(garnet suppliers), it is called ultrasonic degreasing. The recovery tank is not drained.


In this project, every six galvanizing tanks are equipped with one filter, and there are two filters in total(green silicon carbide). Each filter has 17 filter elements, which are replaced once a month. After the impurities in the water are removed by precipitation, all the supernatant is countercurrent back to the galvanizing tank for reuse(glass bead blasting media suppliers). Each galvanizing tank of the project is equipped with one filter, and the filter element is replaced once a month.


It is mainly used to filter the bath solution of galvanizing bath(black silicon carbide). There is an inlet pipe and a water outlet pipe on the filter, which are respectively connected to the electroplating tank. The electroplating bath solution enters the filter through the water inlet pipe, and then enters the electroplating tank from the outlet pipe(white corundum sand). As long as the production line is in production, the filter has been circulating the plating bath solution.(cheap aluminum oxide 1000 grit producers belgium)


After electro galvanizing(aluminum oxide abrasive), there is a zinc recovery treatment (the zinc recovery rate is up to 95%). The bath slag is handed over to the electroplating Center as a hazardous waste for unified treatment by qualified units. After recovery, the workpiece enters into two water washing tanks for countercurrent washing(steel grid). The specific production process can refer to the pretreatment process of vertical lifting hanging galvanizing production line.


(cheap aluminum oxide 1000 grit producers belgium)It is mainly used to filter the bath solution of galvanizing bath(aluminum oxide grit). There is an inlet pipe and a water outlet pipe on the filter, which are respectively connected to the electroplating tank. The electroplating bath solution enters the filter through the water inlet pipe, and then enters the electroplating tank from the outlet pipe(aluminum oxide polish). As long as the production line is in production, the filter has been circulating the plating bath solution.


white aluminium oxide
Contact Us
  • Contact:Terry
  • Tel:0086-15515998755
  • Wechat:Wilson15515998755
  • Whatsapp:0086-15515998755
  • Email:terry@wilsonabrasive.com
Follow Us

Wilson Abrasive CO.,LTD Copyright © 2001-2020 All Rights Reserved. sitemap

Brown Fused Alumina And White Fused Alumina MOQ: 1 Ton! 19 Years Manufacturing Exprience, 35,000m² Workshop Area, Factory Price, Free Samples, Fast Delivery!

no cache
Processed in 0.937090 Second.