Home > technology > Cheap Aluminum Oxide 40 Grit Manufacturers USA

Cheap Aluminum Oxide 40 Grit Manufacturers USA

After a period of time, when there are more suspended particles and less settled particles, it means that the aluminum oxide abrasive media binder has a good suspension property, while when the descending particles are dominant, it is a very bad suspension or not. According to the national standard of our country, the organization of common aluminum oxide 40 grit is divided into 15 grades.


Cheap Aluminum Oxide 40 Grit Manufacturers USA MOQ: 1 Ton! 19 Years Experience Aluminum Oxide 40 Grit Manufacturer, 35,000m² Workshop Area, Free Samples, Fast Delivery!


If you want to buy cheap aluminum oxide 40 grit, please click our products: Brown Fused Aluminum Oxide or White Aluminium Oxide or Black Aluminum Oxide or Pink Aluminum Oxide for more information!


The binder used for water casting must have good suspension, so that the aluminum oxide blasting abrasive particles and the binder can be fully mixed in the slurry, otherwise the abrasive particles, especially the corundum abrasive particles, will sink due to the high density, resulting in the upper and lower layers of the aluminum oxide 220 grit abrasive tools, uneven structure and hardness, insufficient strength and other defects.


The factors that affect the suspension of the binder are: the particle size of the black aluminum oxide media raw material, the type of clay ore and the addition of some strong electrolytes. The fluidity is too low to be evenly distributed among the abrasive particles, so the mechanical strength of the abrasive tool cannot be guaranteed. The volume percentage of abrasive particles in a unit volume is called the abrasive rate.


Although the particle size of brown aluminium oxide raw materials (feldspar, clay, quartz, etc.) of the binder is relatively fine, most of them do not reach the level of colloidal particles (less than 0.1um), which belongs to a coarse dispersion system. When the binder and water constitute the suspension of the coarse dispersion system, that is, the larger the binder particles, the faster the 180 grit aluminum oxide blasting media settling speed and the worse the suspension.


K-feldspar begins to soften and melt at 1130 ℃ and decomposes at 1200 ℃, forming garnet and Si02 melt, becoming glassy viscous substance. After alumina grit melting, the glassy substance of feldspar can dissolve part of clay decomposition products and part of quartz, promoting the porcelain forming reaction and the development and growth of mullite crystal. Generally, the ratio of 150 grit aluminum oxide screen width to length is 1:2.5 ~ 113.5.


Abrasive is composed of brown aluminum oxide, binder and air hole, and abrasive is the main factor that the abrasive plays a cutting role on the workpiece surface. Screening efficiency refers to the ratio of the weight of the actual sieved off sieve to the off sieve contained in the 100 grit aluminum oxide blast media raw material. The chemical composition of quartz is SiO, often containing a small amount of impurities, such as al1o, FeO, Cao, MgO, TiO2, etc.


Therefore, the structure of the grinding tool reflects the density of the distribution of the synthetic corundum price particles which play the main role in grinding, also can be said to be the volume distribution of the abrasive particles in the grinding tool. Expressed as the percentage of abrasive particles in the volume of the tool. The division of microstructure is based on the percentage of 60 grit aluminum oxide particles contained in the abrasive tool. 


It reflects the density of the distribution of brown fused alumina particles in the abrasive tools, and also provides the basis for the users of abrasive tools to choose different abrasive particle distribution under the same hardness condition. 0 is the highest abrasive rate, 1, 2, 3 The number increases in turn, and the alumina abrasive rate decreases in turn, it settles according to the Stokes principle, that is, the structure changes from tight to loose.


The factors that affect the screening efficiency include the humidity of the material, the thickness of the aluminum oxide abrasive blasting grit material layer, the content of the hard to screen particles, the feeding speed, the working parameters of the screen machine and the length of the screen surface. The longer the screen surface is, the longer the white alumina powder material is screened, and the higher the screening efficiency is. The screen width determines the productivity.


white aluminium oxide
Contact Us
  • Contact:Terry
  • Tel:0086-15515998755
  • Wechat:Wilson15515998755
  • Whatsapp:0086-15515998755
  • Email:terry@wilsonabrasive.com
Follow Us

Wilson Abrasive CO.,LTD Copyright © 2001-2020 All Rights Reserved. sitemap

Brown Fused Alumina And White Fused Alumina MOQ: 1 Ton! 19 Years Manufacturing Exprience, 35,000m² Workshop Area, Factory Price, Free Samples, Fast Delivery!

no cache
Processed in 0.908393 Second.