Home > technology > Cheap Aluminum Oxide 500 Grit Wholesale Suppliers USA

Cheap Aluminum Oxide 500 Grit Wholesale Suppliers USA

With some special etchants, a kind of beveled edge can be etched with good control(aluminum oxide abrasive). For the processing of delicate parts with small material thickness, such as the processing of various spring plates or other delicate structural parts; for those metal materials with hard surface and difficult to be machined(aluminum oxide 40 grit), it is often impossible to carry out contour machining with mechanical method for these materials.


Cheap Aluminum Oxide 500 Grit Wholesale USA MOQ: 1 Ton! 19 Years Experience Aluminum Oxide Grit Wholesale Supplier, 35,000m² Workshop Area, Free Samples, Fast Delivery!


If you want to buy cheap aluminum oxide 500 grit, please click our products: Brown Fused Aluminum Oxide or White Aluminium Oxide or Black Aluminum Oxide or Pink Aluminum Oxide for more information!


Chemical etching can only be based on the original surface state of the parts, progressive cutting(white corundum). Therefore, the shape and surface state of the parts after chemical etching are directly related to the original shape and surface state of the parts. The bubbles blocked under the corrosion protection layer actually separate the metal surface from the corrosive agent(white fused alumina for refractory), usually only two cases will be used.(cheap aluminum oxide 500 grit wholesale suppliers usa)


More often, the machined surface after chemical etching is completely parallel to the original original reference surface state(silicon carbide abrasive). The geometric shape of the formed etching edge is mainly related to the thickness of the material. The shape of chemical etching edge will also have a certain deviation, sometimes the deviation will be larger(brown aluminium oxide 24 mesh). Therefore, the formation of very irregular edges is a very troublesome thing for deep processing.


(cheap aluminum oxide 500 grit wholesale suppliers usa)Chemical etching can't be used for rough surface plate and bar to process complex shape parts(white fused alumina). If it is necessary to process thin webs or shallow flanges on some parts of complex parts, all geometric shapes must be machined to a certain degree by mechanical means(emery abrasive), and the following chemical etching is only to remove a layer of metal evenly parallel to the machined surface to achieve the required thickness and shape.


The change of corrosion coefficient will be caused by the change of the adhesion force and the composition of the corrosion agent in the process of processing(green silicon carbide). Therefore, chemical etching can not be used to process structural parts with strict tolerance requirements(aluminum oxide grit). Simple shape and size processing, when the processing reaches a certain rolling degree, that is often said to be chemical blanking.(cheap aluminum oxide 500 grit wholesale suppliers usa)


Another problem that must be paid attention to is that chemical etching can not be used to process narrow and deep return grooves(white aluminum oxide). This is because the bubbles generated in the chemical etching reaction converge below the edge of the corrosion protection layer(white aluminum oxide grit). For pipes less than 12mm in diameter, only both ends of the pipe can be plugged to remove excess metal from the outside of the pipe.


(cheap aluminum oxide 500 grit wholesale suppliers usa)Although some corrosion-resistant materials with good performance are soft and easy to discharge bubbles(black silicon carbide), even if the mechanical stirring method is used, it is not enough to completely discharge the bubbles at the edge of the anti-corrosion layer(synthetic corundum). The most effective method for this kind of processing is time-consuming The anti-corrosion layer on the edge of the figure is smoothed by hand.


white aluminium oxide
Contact Us
  • Contact:Terry
  • Tel:0086-15515998755
  • Wechat:Wilson15515998755
  • Whatsapp:0086-15515998755
  • Email:terry@wilsonabrasive.com
Follow Us

Wilson Abrasive CO.,LTD Copyright © 2001-2020 All Rights Reserved. sitemap

Brown Fused Alumina And White Fused Alumina MOQ: 1 Ton! 19 Years Manufacturing Exprience, 35,000m² Workshop Area, Factory Price, Free Samples, Fast Delivery!

no cache
Processed in 1.039343 Second.