Home > News > Cheap Aluminum Oxide Abrasive Blasting Grit China

Cheap Aluminum Oxide Abrasive Blasting Grit China

Non metallic: ceramic plate, glass plate, resin plate. Open charging this method is to place the 100 grit aluminum oxide white parts on the base plate, and then put them in the hardening furnace to harden. Its advantages are simple and labor-saving, and the operator is more convenient. Its disadvantages are that the heating conditions of the upper and lower sides are inconsistent, and the white fused aluminium oxide hardness of the upper and lower sides is easily different.


Cheap Aluminum Oxide Abrasive Blasting Grit China MOQ: 1 Ton! 19 Years Experience Aluminum Oxide Abrasive Manufacturer, 35,000m² Workshop Area, Free Samples, Fast Delivery!


If you want to buy cheap aluminum oxide abrasive blasting grit, please click our products: Brown Fused Aluminum Oxide or White Aluminium Oxide or Black Aluminum Oxide or Pink Aluminum Oxide for more information!


Hardening Plate classification metal: brown fused aluminum oxide suppliers aluminum plate, aluminum alloy plate, iron plate. In order to overcome the above shortcomings, in addition to the cover plate method and the buried sand method, the base plate with slot and hole can be used. The utility model has the advantages that the heating conditions of the parts are the same, the hardening of both sides of the grinding tool is the same, and the mechanical strength of the brown aluminum oxide 250 grit grinding tool is also improved. 


In addition, the harmful gases (such as free phenol vapor, etc.) produced in the brown fused alumina oxide hardening process should be eliminated in time. Cover plate charging (also called sandwich charging) this method is to cover the base plate on the workpiece when charging, and clamp the brown fused alumina suppliers grinding wheel between the two base plates. Therefore, only special parts (such as coarse-grained low hardness and easily deformed parts) can adopt this charging method.


This method is to embed the parts in quartz sand or fill the holes of the white fused alumina parts with quartz sand, and then harden them. The utility model has the advantages of ensuring the heating uniformity of the parts, avoiding the influence of the atmosphere and temperature fluctuation in the furnace, and preventing the deformation of the shaped products. The appearance is dark brown large particle dry glue, wholesale brown fused alumina which is bound into large pieces after packaging and storage.


But this method is labor-intensive, electricity and fuel consuming. For white aluminum oxide large size, high hardness and easily deformed parts, the parts with small temperature change shall be installed to prevent the parts from foaming, cracking and deformation. Oil filled styrene butadiene rubber has been used in the trial production of hard rubber grinding wheel, but the results show that the adhesive, wear resistance and strength of the brown fused alumina 60 grit grinding tool are not satisfactory.


When the liquid phenolic resin is heated for polycondensation, the finer the white corundum grain size, it can be divided into three stages: A, B and C. Some of the workpieces with coarser particle size and lower hardness (such as the simple grinding wheel) are packed by the method of wrapping paper. This method is to wrap paper around the outside diameter of the formed parts to prevent the collapse and deformation of the parts during the aluminium oxide grit suppliers hardening process.


Stack loading method (stack pressing method) for some brown fused aluminium oxide (such as thin disc grinding wheel, small diameter parallel grinding wheel, sand tile, etc.). In order to make it hard to deform in the hardening process, increase the charging density and save the backing plate, the stack charging method can be used. Under the condition of uneven temperature in the brown fused alumina factory furnace, the position of charging shall be considered during charging.


Grain size of white fused alumina price in abrasive tools: the smaller the porosity, the less volatile matter is easy to be discharged when hardening, and the heating rate should be slowed down, and vice versa. Styrene butadiene rubber filled with styrene is a kind of styrene butadiene rubber which is added with a large amount of advanced sulfonated hydrocarbon or alkane mineral oil and solidified and dried when the white aluminum oxide abrasive emulsion is polymerized at low temperature.


white aluminium oxide
Contact Us
  • Contact:Terry
  • Tel:0086-15515998755
  • Wechat:Wilson15515998755
  • Whatsapp:0086-15515998755
  • Email:terry@wilsonabrasive.com
Follow Us

Wilson Abrasive CO.,LTD Copyright © 2001-2020 All Rights Reserved. sitemap

Brown Fused Alumina And White Fused Alumina MOQ: 1 Ton! 19 Years Manufacturing Exprience, 35,000m² Workshop Area, Factory Price, Free Samples, Fast Delivery!

no cache
Processed in 1.532064 Second.