Home > News > Cheap Brown Corundum Abrasive Manufacturers Taiwan

Cheap Brown Corundum Abrasive Manufacturers Taiwan

The second washing was carried out 24 hours after the reaction(brown aluminium oxide manufacturer). In the process of water washing, when the pH=3 of the Mongolian material is about, the phenomenon of suspension is not easy to precipitate occurs. Wet grinding can not only improve the production capacity, but also eliminate the pollution of metal Fe, remove the pickling process(aluminium oxide 36 grit), there are particle grouting method and slurry grouting method; and eliminate the environmental pollution.


Cheap Brown Corundum Abrasive Manufacturers Taiwan MOQ: 1 Ton! 19 Years Experience brown corundum Manufacturer, 35,000m² Workshop Area, Free Samples, Fast Delivery!


If you want to buy cheap brown corundum abrasive, please click our products: Brown Fused Aluminum Oxide for more information!


Casting forming: the special shape products such as alumina crucible, furnace tube, thermocouple tube(white fused aluminum oxide 60 grit), ball mill tube, grinding body, grinding medium ball, plate and sheet products and columnar solid products can be produced by casting forming. Requirements for making good slurry: from the aspect of proportioning(black silicon carbide factory), from the aspect of product shape, there are hollow grouting method and solid grouting method; from the aspect of operation.(cheap brown corundum abrasive manufacturers taiwan)


When the upper injection molding method is used(brown aluminum oxide 70 grit), the prepared slate mold shall be placed flat and straightened first, and the combined gypsum mold shall be bound with rubber tube or plywood to prevent slurry leakage during the pouring process(aluminium oxide grit 24 mesh). In large-scale production of slurry casting products, a large-scale ball mill with the same medium (corundum ball mill lining, corundum grinding medium ball) can be used, there are up injection method and down injection method.


The speed of moving up shall be that the slurry surface is slightly higher than the slurry surface in the gypsum mold(white aluminum oxide 220 grit). When grouting with aluminum one, the glass rod shall be used for drainage, i.e. the glass rod shall be close to the bottom of the stone sound mold to make the slurry flow down the glass rod, so as to prevent the slurry from impacting the bottom to produce depression and bubble(black silicon carbide suppliers). The small batch and non fixed casting products can be formed by the upper injection method.


(cheap brown corundum abrasive manufacturers taiwan)If the slurry is not replenished in time, the shortage of slurry will cause local defects in the blank(brown fused alumina). According to the product thickness requirements, the slurry suction time is generally controlled at 5-10min. The slurry suction thickness of gypsum mold is measured by observation and measurement, and the slurry discharge time shall be well controlled(brown fused alumina grit). When discharging, it should not be too fast or too fierce to prevent deformation or collapse of the blank.


When using the injection molding method, the slurry shall be placed in the bucket which can move up and down freely(brown aluminum oxide). The bucket and the stone green mold shall be connected by rubber pipe. After opening the valve, the horizontal position of the bucket shall be raised slowly to make the slurry level rise slowly, so as to prevent bubbles or slurry overflowing the stone green mold(white aluminum oxide 120 grit). During the suction time, the slurry barrel shall be moved up slowly and continuously.


The suction time was controlled by observation and measurement(brown aluminium oxide). The gypsum mould with the body after the sweet paste should be inverted and slightly inclined (i.e. the grouting port or the discharge port should be downward), so as to discharge all the residual slurry and facilitate the separation of the casting body and the stone green mould(brown aluminum oxide blast media). The first kind of products with increased volute are poured by injection method.(cheap brown corundum abrasive manufacturers taiwan)


After the slurry is poured, the slurry aspirating material higher than the upper plane of the stone sound mold shall be scraped with a blade(white aluminium oxide), and the mold can be demoulded after the blank body is completely removed from the mold and has a certain strength. When the gypsum mold is filled with mud, it is necessary to make up the mud continuously to ensure that the liquid level will not be lowered(brown fused alumina for grinding). Dry powder shall be stored in a sealed way for standby.


white aluminium oxide
Contact Us
  • Contact:Terry
  • Tel:0086-15515998755
  • Wechat:Wilson15515998755
  • Whatsapp:0086-15515998755
  • Email:terry@wilsonabrasive.com
Follow Us

Wilson Abrasive CO.,LTD Copyright © 2001-2020 All Rights Reserved. sitemap

Brown Fused Alumina And White Fused Alumina MOQ: 1 Ton! 19 Years Manufacturing Exprience, 35,000m² Workshop Area, Factory Price, Free Samples, Fast Delivery!

no cache
Processed in 1.290073 Second.