Home > application > Cheap Synthetic Corundum Wholesale Price Russia

Cheap Synthetic Corundum Wholesale Price Russia

Especially for the green silicon carbide furnace, the spent material containing table salt solidifies in water, and the spent material sticks together, making it more difficult to cook the furnace. This process naturally cools for more than 20 hours and starts watering. It is slowly poured with a small mist of water, and brown aluminum oxide 70 grit gradually infiltrates.


Cheap Synthetic Corundum Wholesale Price Russia MOQ: 1 Ton! 19 Years Experience Synthetic Corundum Manufacturer, 35,000m² Workshop Area, Free Samples, Fast Delivery!


If you want to buy cheap synthetic corundum, please click our products: Brown Fused Aluminum Oxide or White Aluminium Oxide or Black Aluminum Oxide or Pink Aluminum Oxide for more information!


It is necessary to prevent water from entering the crystallizer prematurely and reacting with brown fused alumina to generate silicon dioxide, silicon and carbon, so that the crystals become black and dark or become waste products. The watering time is based on the water content of the white fused alumina oxide mfg crystal block being <0.5%. When the salt increases, the resistivity of the spent material decreases and the electrical conductivity increases.


When the brown fused alumina 60 grit furnace is installed, the salt content in the insulation material is 0% to 0.5%. However, the reaction furnace of the green furnace contains 4% to 10% of common salt. With the exception of a small amount of these salts, they are mostly transferred to the spent material. Table salt transfers more to the sides and below. Especially in the waste corundum white material layer of the furnace bottom, there is a salt-dissolving area with high salt content.


The salt content of the waste material in this area is as high as 30% to 40%. It can be seen that normal brown aluminum oxide production cannot be guaranteed if the green furnace waste material is not desalted. The smelting method does not have as much influence as the new method because it uses new white fused aluminum oxide materials with no salt on the bottom or both sides of the furnace. The desalting of waste materials includes washing, soaking, and outdoor rain. 


The salt content in the lower part of the concrete wall is 21%, the aluminium oxide grit suppliers middle part is 16%, and the upper part is 9%. As a whole, the salt content of spent material increases by about 8% to 9% after each smelting. If the salt in the spent material is not removed and repeatedly used, the salt content will be very high, which will cause serious leakage and white aluminum oxide blast media smelting furnaces in the smelting process, and the furnace output will drop sharply.


The salt need not be completely removed, as long as the brown aluminium oxide content is less than 0.5%. The washed and washed material should be air-dried until the moisture content drops to 6% ~ 10%. It must also be sieved before dosing. In this method, because the crystallizing cylinder needs to be moved from the furnace, buy brown fused alumina and it needs to be turned in the opposite direction during classification, the primary product is broken and wasted.


The brown fused alumina factory products in the resistance furnace after smelting include first-grade silicon carbide, decomposed graphite, old furnace cores, fine crystals and spent materials. Out-of-burning classification is to remove graphite and crystalline blocks from the resistance furnace that has passed through the griddle, and separate graphite, primary products, secondary products, amorphous materials, binders, white aluminum oxide 220 grit, and spent materials.


The out-of-bath classification first removes the unscrubbed waste material and brown fused alumina suppliers with excessive impurities, and the binder, and then performs the classification. One is the furnace classification method. The secondary product layer is shoveled off without splitting the crystal tube, and then the crystal tube is split for classification. The advantage is that the first-grade product white aluminium oxide manufacturer crystal block is less broken and wasted.


 The other is the classification method outside the furnace. The white aluminum oxide abrasive 220 grit crystal block is removed first, and then moved to the field outside the furnace for classification. Baking takes place 48 hours after the furnace is shut down. There are two processes for classification. The salt on the top of the brown fused aluminum oxide factory furnace is still 0.16% ~ 0.2%. 


white aluminium oxide
Contact Us
  • Contact:Terry
  • Tel:0086-15515998755
  • Wechat:Wilson15515998755
  • Whatsapp:0086-15515998755
  • Email:terry@wilsonabrasive.com
Follow Us

Wilson Abrasive CO.,LTD Copyright © 2001-2020 All Rights Reserved. sitemap

Brown Fused Alumina And White Fused Alumina MOQ: 1 Ton! 19 Years Manufacturing Exprience, 35,000m² Workshop Area, Factory Price, Free Samples, Fast Delivery!

no cache
Processed in 3.911572 Second.