Home > News > Low Price Black Silicon Carbide Powder India

Low Price Black Silicon Carbide Powder India

If the latex has been frozen, do not add other substances or stir before thawing(brown fused alumina). Instead, in the 1950s Since then, move the frozen latex together with the container into a 30-4oc warm room to allow it to slowly thaw naturally. It will be normal after its appearance returns to normal. use. The bonding strength of the polyvinyl acetate emulsion is closely related to the pressing time(silicon carbide abrasive). The pressing time is long and the bonding strength is high.


Low Price Black Silicon Carbide Powder India MOQ: 1 Ton! 19 Years Experience Black Silicon Carbide Manufacturer, 35,000m² Workshop Area, Free Samples, Fast Delivery!


If you want to buy low price black silicon carbide powder, please click our products: Black Silicon Carbide for more information!


The basic way is to change its molecular structure so that it can be converted from thermoplastic resin to thermosetting resin(brown aluminum oxide). At present, the appearance is milky white viscous liquid, uniform and without obvious particles. During the bonding process, pressure and heating should be used to improve the bonding effect(synthetic corundum). The general pressing temperature is about 40 ℃. At present, the domestic use of N-methylol acrylamide and vinyl acetate copolymerization.


Domestically produced PVAC emulsions should meet the following technical requirements(brown aluminium oxide): Solid content 50 ± 2% Viscosity: 1500 ~ 4000 centipoise (20 ℃) Particle size: 1 ~ 2 microns PH value 4 ~ 6 In order to improve the two weaknesses of the polyvinyl acetate emulsion, namely poor water resistance and poor heat resistance, a lot of work has been done at home and abroad(green silicon carbide). The quality of the raw material, that is, the impurities and content will affect the quality of the resin.


Therefore, acrylic, methyl methacrylate or crotonic acid can also be used for others(brown fused aluminum oxide). In the production of polyvinyl acetate emulsion, one or more substances capable of copolymerizing with vinyl acetate monomer are added to react to form a cross-linkable thermosetting copolymer(aluminum oxide abrasive), which is further cross-linked and cured during the gluing process The cured adhesive layer is insoluble and infusible, heat resistance, water resistance and creep resistance are greatly improved.


When using polyvinyl acetate emulsion, a substance capable of further crosslinking the emulsion molecules is added, and gradually converted into thermosetting resin(white aluminium oxide). At present, such commonly used external cross-linking agents are phenolic resin, urea-formaldehyde resin, silica gel and so on(emery abrasive). Therefore, it is necessary to control the time according to the molar ratio of the raw materials, so the bonding strength, the PH value of the medium and the reaction temperature.


When in use, phenolic resin or urea-formaldehyde resin can be directly added to the latex(black aluminum oxide), or polyvinyl acetate emulsion and phenolic resin or urea-formaldehyde resin can be used, which are coated on the two bonded surfaces Then, the glue pressing process should be emphasized here, that is, it is not suitable to use high temperature curing phenolic resin or urea resin(aluminum oxide grit). The higher the free methylol content in the urea-formaldehyde resin, the worse the water resistance of the resin.


The latex modified by the above method greatly improves the adhesive strength, water resistance and heat resistance(pink aluminum oxide), but the disadvantage is that the hardness of the adhesive film has increased. Urea-formaldehyde resin is a condensate formed by reacting polycondensation of urea and formaldehyde under the action of alkaline or acidic catalyst(brown aluminium oxide 24 mesh), and then converted into an insoluble and infusible solid resin with a network structure by the action of a curing agent.


white aluminium oxide
Contact Us
  • Contact:Terry
  • Tel:0086-15515998755
  • Wechat:Wilson15515998755
  • Whatsapp:0086-15515998755
  • Email:terry@wilsonabrasive.com
Follow Us

Wilson Abrasive CO.,LTD Copyright © 2001-2020 All Rights Reserved. sitemap

Brown Fused Alumina And White Fused Alumina MOQ: 1 Ton! 19 Years Manufacturing Exprience, 35,000m² Workshop Area, Factory Price, Free Samples, Fast Delivery!

no cache
Processed in 1.198284 Second.