Home > wholesale > OEM White Corundum and Brown Corundum Abrasive

OEM White Corundum and Brown Corundum Abrasive

At present, for example, the conical pipe at the end of the rotary volume coal injection pipe is made of stainless steel, the rotary dense passenger head iron brick is made of heat-resistant cast iron, and the rotary dense village is made of clay refractory brick, high alumina refractory brick, etc.


OEM White Corundum and Brown Corundum MOQ: 1 Ton! 19 Years Experience White Corundum and Brown Corundum Supplier, 35,000m² Workshop Area, Free Samples, Fast Delivery!


If you want to oem white corundum and brown corundum abrasive , please click our products: Brown Fused Alumina or White Fused Alumina for more information!


Alumina is used for power supply and aluminum hydrolysis (more than 90%), but many departments such as electronics, petroleum, chemical industry, refractories, ceramics, plastics, textiles, abrasives, papermaking and pharmacy also need alumina and aluminum hydroxide with various special properties(aluminium oxide blasting grit). These varieties of non metallurgical alumina account for 8% - 10% of the total alumina output, with more than 200 varieties.


In addition, there is a large amount of dust in the production process. In order to prevent air pollution and maintain environmental hygiene, even atmospheric equipment or low-pressure equipment are required to be sealed to reduce the leakage to an allowable level(fine grit aluminum oxide). Some require special explosion-proof valves(oem white corundum and brown corundum abrasive). If there is too much combustible pulverized coal in the rotary kiln, it is very easy to explode during ignition.


Therefore, some of the equipment and pipelines after dense rotation should be equipped with anti explosion valves, such as post capacity Liyin channel, cyclone dust collector, electric dust collector, etc. Instruments must be used to indirectly monitor the internal conditions of the equipment(220 grit aluminum oxide blast media). In addition to using more general carbon steel, some parts need to use stainless steel or special alloy, and more equipment lined with non-metallic materials.


Alumina production is carried out under certain process conditions (pressure and temperature). Because the equipment is closed, the pressure and temperature values cannot be obtained directly(alumina blasting). It is necessary to install instruments on the equipment to indirectly narrow out the working conditions of the equipment. There are a lot of equipment under high temperature, high pressure and corrosive working conditions(oem white corundum and brown corundum abrasive).


There are many mechanical equipment used in alumina production(240 grit aluminum oxide). Due to the specific conditions of alumina production, a considerable number of mechanical equipment used in the production process are special equipment for alumina production. The content is basically introduced according to the production process of sintering method (alkali lime method). For the above, this shows the importance of equipment design practicality.


Describe the type, structure, working principle, specification, characteristics, installation, use and maintenance of each type of mechanical equipment. Good sealing performance is required(oem white corundum and brown corundum abrasive). The pressure vessel must have good sealing performance and no leakage(alumina grit). A group of mechanical equipment has transmission devices and many pipe holes to prevent oil leakage, material leakage, water leakage and air leakage (steam).


These mechanical equipment are described in detail(aluminum oxide blasting abrasive). In the design of mechanical equipment used in alumina production, in addition to the necessary theoretical knowledge of mechanical design, chemical engineering calculation methods should be used to determine the process size and other working parameters (speed, slope, production capacity, power, etc.) on the basis of material balance and heat balance according to the working principle of chemical unit operation. 


In the process of using the mechanical equipment used in alumina production, many changes have been made in terms of structure, size and accessories according to the requirements of production practice(oem white corundum and brown corundum abrasive). Although some mechanical equipment are used in general chemical unit operation, some have also been modified to meet the requirements of production due to the specific conditions of alumina production.


Although sintering process is different from Bayer process, chemical reaction is used for chemical unit operation(aluminum oxide blasting grit). This is in line with the objective law of "practice, cognition, re practice and re cognition". With the progress of science and technology and management technology, the performance of alumina production equipment will be further improved and develop in the direction of high efficiency, energy saving and less pollution.


"Alumina production equipment" is an important professional course(oem white corundum and brown corundum abrasive). At present, one of the main tasks of learning this course is to understand the basic principles and basic laws of various chemical unit operations in alumina production process, and be familiar with the equipment structure, working principle, working conditions, main performance and technical problems related to the use of these operations.


Alkali method can be divided into sintering method, Bayer method and Bayer sintering combined method according to the different methods of converting alumina into sodium aluminate solution in ore(pink aluminum oxide). The theoretical requirements are high(oem white corundum and brown corundum abrasive). Of course, in the process of learning this course, we should also correctly select theoretical formulas or empirical formulas, such as correctly selecting empirical data and learning to use charts.


At the same time, we should also master certain computing ability (such as the calculation of process size, production capacity and power), so that readers can use this knowledge to analyze and solve practical problems in practice, so that all operations can be carried out under the optimal conditions and create higher economic benefits(aluminium oxide shot blasting grit). The development of economy depends on scientific management and innovative science and technology. 


To deal with any problem in the process of alumina production, we must have four concepts: theoretical correctness(oem white corundum and brown corundum abrasive); Technical feasibility; Operational safety; Economic rationality. Among these four concepts, economy is the core(150 grit aluminum oxide). Safety is an important guarantee for the realization of production, and strong economic strength is an indispensable prerequisite for the development of science and technology.


Therefore, the following four concepts themselves are a unity of mutual connection and mutual promotion(black corundum). However, in order to maintain the integrity of the mechanical equipment used in alumina production, we can have an overall understanding of the mechanical equipment used in alumina production through this course, and also give a more detailed description of general mechanical equipment, such as pumps, fans, compressors, cyclones, bag filters and electrostatic precipitators.


white aluminium oxide
Contact Us
  • Contact:Terry
  • Tel:0086-15515998755
  • Wechat:Wilson15515998755
  • Whatsapp:0086-15515998755
  • Email:terry@wilsonabrasive.com
Follow Us

Wilson Abrasive CO.,LTD Copyright © 2022 All Rights Reserved.

Brown Fused Alumina And White Fused Alumina MOQ: 1 Ton! 19 Years Manufacturing Exprience, 35,000m² Workshop Area, Factory Price, Free Samples, Fast Delivery!

no cache
Processed in 1.902146 Second.