Home > technology > White Fused Alumina For Refractory Wholesale UK

White Fused Alumina For Refractory Wholesale UK

The melting point of Cao is 2570 ℃, which is rich in resources and cheap in price(120 grit aluminum oxide). However, it is difficult to sinter, has low stability in the atmosphere and is easy to hydrate, which is the biggest problem in the manufacture of Cao products(aluminum oxide blast media). The raw material for the preparation of pure calcium oxide is chemical pure calcium carbonate or calcium hydroxide, which is burned at a temperature slightly higher than its decomposition temperature.


White Fused Alumina For Refractory Wholesale UK MOQ: 1 Ton! 19 Years Experience White Fused Alumina Manufacturer, 35,000m² Workshop Area, Free Samples, Fast Delivery!


If you want to buy white fused alumina for refractory, please click our products: White Aluminium Oxide for more information!


The hydration rate of calcium oxide in the products is directly proportional to its porosity(pink corundum). In the process of manufacturing calcium oxide products, the self-made agglomerates must be kept in a moisture-free medium until the products are burned and used(best alumium oxide for glass blasting). When pouring calcium oxide, the mixture of anhydrous alcohol or paraffin and oleic acid must be used. Carbide is the most difficult to melt, followed by nitride, boride, silicide and sulfide.


In order to enhance the stability of calcium oxide products, various additives can be added to make them form a low fusibility eutectic mixture on the surface of Cao crystal during the calcination process, forming a protective film(brown fused alumina price). When CaO crucible is made by pressing method, 1% beeswax carbon tetroxide solution can be added as binder. In addition, it can be used in mechanical industry, chemical industry, etc(black silicon carbide manufacturers).


In the process of manufacturing stable crucible and other products, 5% ~ 10% TiO2 is usually added, and CaO + TiO2 is lubricated with dextrin or other organic binders, then pressed into agglomerates, and pre fired at 1650 ~ 1700 ℃(black corundum). A small amount of lubricating oil is added into the mixture of fine grinding (less than 0.074mm), which is molded under the pressure of 50-70mpa, and then fired at 1650-1700 ℃(brown fused aluminum oxide manufacturers).


The product is made by sintering with the powder of the compound(white fused alumina). In order to prevent the cochlea from being hydrated in storage, a protective layer can be coated on it. Calcium oxide is a very suitable and easy to get raw material, which can be used to make crucible collapse and other products with very good slag resistance, so it can be used to smelt high-purity metals(brown aluminum oxide 80 grit), such as platinum, blunt, bowl and shaft, thorium, etc.


For example, TiO2, BeO, FeO3 + MoO2, FeO + cr-o + mo0(white aluminum oxide). There are dozens of hard and refractory compounds of carbides, nitrides, borides, silicides and sulfides, and their melting points range from 2000c to almost 4000 ℃. These compounds are usually prepared by direct synthesis or reduction of metals or metal compounds with C, B, Si, s or their compounds(silicon carbide 180 grit). Nitrides can be obtained by burning oxides and carbon in pure nitrogen or ammonia.


Carbide products can also be manufactured by hot pressing after cold pressing and high temperature sintering(white corundum). These products include MOC, TAC, WC, tic, etc. Titanium carbide (TIC) is the best one of all the carbides. It has high melting point, high oxidation resistance, small specific gravity and high hardness(100 grit aluminum oxide). Generally, these borides are metallic in appearance, less conductive than metals, and have a positive resistance temperature coefficient.


white aluminium oxide
Contact Us
  • Contact:Terry
  • Tel:0086-15515998755
  • Wechat:Wilson15515998755
  • Whatsapp:0086-15515998755
  • Email:terry@wilsonabrasive.com
Follow Us

Wilson Abrasive CO.,LTD Copyright © 2001-2020 All Rights Reserved. sitemap

Brown Fused Alumina And White Fused Alumina MOQ: 1 Ton! 19 Years Manufacturing Exprience, 35,000m² Workshop Area, Factory Price, Free Samples, Fast Delivery!

no cache
Processed in 1.821691 Second.