Home > technology > White Fused Aluminum Oxide 60 Grit Factory Ireland

White Fused Aluminum Oxide 60 Grit Factory Ireland

After cleaning, the pretreated module is placed in the vacuum pressure reducing coating coating device(brown fused aluminum oxide), and the large module is immersed in the coating for 5 seconds under the vacuum of 5 Torr, so the surface coating of the module is completely coated(brown fused alumina powder). The metal oxides used in the grain refiner are diamond, silver, natural and iron oxides. At present, the coating operation can be carried out by manual operation or automatic shell making robot.


White Fused Aluminum Oxide 60 Grit Factory Ireland MOQ: 1 Ton! 19 Years Experience White Fused Aluminum Oxide Grit Factory, 35,000m² Workshop Area, Free Samples, Fast Delivery!


If you want to buy white fused aluminum oxide 60 grit, please click our products: White Aluminium Oxide for more information!


Almost all the precision castings are made of the wrong quartz sand, while the mullite fine sand can be used for aluminum alloy(carborundum abrasives). If silica sol is used as a basic binder, its properties should be understood. Therefore, some grain refiners can be added to the surface coating in advance to make the material to be refined by quality control, so as to improve the mechanical properties of the body in essence(aluminium oxide polishing compound). The narrower the peak width of the detection distribution, the better.


(white fused aluminum oxide 60 grit factory ireland)However, when the surface layer with more than 105 mesh is used for sand inspection(black corundum), the air permeability of the mold shell becomes clear and the container has defects of poor liquid metal filling. The composition of mianwang coating made by non-ferrous alloy Fupin, such as partial alloy, is different from the composition of the above-mentioned iron series coating(white grain aluminum oxide a 220). Therefore, it is necessary to reduce the concentration of silica sol.


The surface coating is composed of refractory powder for surface coating and silica sol(carborundum grit). When the average tensile strength of the surface sand is 65 ~ 70 days, the surface of the casting is relatively horizontal. It is better to use the surface layer of 100 ~ 105 days to remove the sand, so as to obtain a smooth and beautiful casting surface(white aluminium oxide grit suppliers). Even for aluminum alloy, high surface precision precision precision parts can be obtained, which will damage the air permeability.(white fused aluminum oxide 60 grit factory ireland)


After that, the module is placed on the low-speed centrifuge for a certain period of time, and the excess coating is used(pink corundum). The rotation time can be arbitrarily adjusted and controlled depending on the shape and size of the casting. And it can prevent sand sticking to make the casting surface smooth and beautiful(aluminum oxide powder). Basically, it is composed of a layer layer. For aluminum alloy parts, the dispersity of the belt pattern after injection is a big problem. 


(white fused aluminum oxide 60 grit factory ireland)The first choice is to add a certain proportion of precot adhesive to the wall, while the agent and mianfubiao can be used(black aluminum oxide blast media). In addition, it is common to add geomorphism agent, shadow soil and main isosurface separation agent in surface coating. With this method, the coating can be evenly wetted, and the coating accumulated in the hollow part can be completely removed(aluminium oxide suppliers). Compared with the current manual operation, the coating can be applied very quickly.


The surface of parts is the basic requirement of surface coating(100 grit aluminum oxide white). If the viscosity of the surface coating is too high or too low, it is not conducive to obtain qualified precision parts. If the viscosity of the coating is too high, that is, too much powder is added into the coating, a relatively stable mold quantity will be formed(white aluminum oxide lapping compound). Of course, the shell container will crack during the degumming, which means that it is difficult to strand the shell after injection.


white aluminium oxide
Contact Us
  • Contact:Terry
  • Tel:0086-15515998755
  • Wechat:Wilson15515998755
  • Whatsapp:0086-15515998755
  • Email:terry@wilsonabrasive.com
Follow Us

Wilson Abrasive CO.,LTD Copyright © 2001-2020 All Rights Reserved. sitemap

Brown Fused Alumina And White Fused Alumina MOQ: 1 Ton! 19 Years Manufacturing Exprience, 35,000m² Workshop Area, Factory Price, Free Samples, Fast Delivery!

no cache
Processed in 1.029450 Second.