Home > technology > White Aluminium Oxide 180/220 Manufacturers India

White Aluminium Oxide 180/220 Manufacturers India

701 mortar shall be used for the important parts such as the vault, and general mortar shall be used for the furnace bottom and other parts(brown aluminum oxide factory). Generally, four expansion joints are left along the long side of the combustion chamber, which can be cancelled in fact, because it is easy to burn through and leak air(aluminum oxide 180 grit blast media). It is an innovation in our country that the shaft furnace adopts the air guide wall technology.


White Aluminium Oxide 180/220 Manufacturers India MOQ: 1 Ton! 19 Years Experience White Aluminium Oxide Manufacturer, 35,000m² Workshop Area, Free Samples, Fast Delivery!


If you want to buy white aluminium oxide 180/220, please click our products: White Aluminium Oxide for more information!


In the process of bricklaying, due to the large working face and the large number of bricks(brown fused alumina price), if one part fails to meet the quality requirements of bricklaying (such as large brick joints, insufficient mud, etc.), practice has proved that the red hot gas will penetrate from these weak points and move along the inner wall of the furnace shell, and leak out from the loose part of the metal furnace shell(silicon carbide abrasive grit). There are two kinds of continuous sintering machine: ring type and belt type.


For example, the quantity of brick laying in two combustion chambers of HANGGANG is about 120t(black corundum). At present, most countries adopt sintering machine with tail swing frame, which not only solves the problem of thermal expansion of the trolley, but also eliminates the impact between the trolleys, reduces harmful air leakage and makes the trolley run smoothly. The effect of using movable tail structure is satisfactory(carborundum grit). Now the belt type sintering machine is widely used.


The joint shall be less than 2mm(pink corundum). The expansion problem mainly depends on the filling materials such as insulating brick and chicken feather ash outside the masonry, so as to buffer the expansion or contraction of the refractory brick masonry. Peripheral expansion joint is adopted for the whole combustion chamber masonry(120 grit aluminum oxide blasting media). In addition, a multi-directional sliding support is arranged at the bottom of the combustion chamber.


The cross-sectional area of the baking belt of 16m shaft furnace of wood steel is 2.088m wide and 7.056m long(silicon carbide grit). The height of drying belt is 1.260m, preheating melting belt is 2.600m, average tropical belt is 2.570m, cooling belt is 3.500m, the height from the center line of ore discharge roller of furnace to furnace mouth is 12.810m, and the volume is 190m(carborundum abrasives). In fact, the resistance coefficient of rolling bearing is close to that of sliding bearing.


The fire nozzle is built with refractory bricks above and high alumina bricks below(white fused alumina). The combustion chamber adopts the semicircle dome rectangular combustion chamber, which has the advantages of simple structure, compact configuration, good sealing performance and low combustion chamber pressure(aluminum oxide blasting media). In order to ensure its air tightness, each layer of brick is built with phosphate slurry, and the brick joint is not dry for 2mm.


Therefore, on the one hand to compensate for the displacement caused by thermal expansion(white aluminum oxide), on the other hand to reduce the friction of the combustion chamber on the civil platform, on the other hand, the use of fire-resistant plastic integral stamping combustion chamber is also very simple and reliable(black silicon carbide powder). Therefore, it is required that the bricks used for the wind guide wall have excellent performance, generally using high-quality clay bricks or high aluminum bricks.


Its existence makes the furnace have a channel(white corundum), effectively shortens the material layer through which the cooling air passes, greatly reduces the resistance, increases the cooling air volume, improves the cooling effect, and greatly reduces the power consumption of the main fan. The working condition of the air guide wall is very bad(green silicon carbide powder). It not only bears the scour of the high temperature airflow, but also suffers the huge side pressure and wear of the pellet.


white aluminium oxide
Contact Us
  • Contact:Terry
  • Tel:0086-15515998755
  • Wechat:Wilson15515998755
  • Whatsapp:0086-15515998755
  • Email:terry@wilsonabrasive.com
Follow Us

Wilson Abrasive CO.,LTD Copyright © 2001-2020 All Rights Reserved. sitemap

Brown Fused Alumina And White Fused Alumina MOQ: 1 Ton! 19 Years Manufacturing Exprience, 35,000m² Workshop Area, Factory Price, Free Samples, Fast Delivery!

no cache
Processed in 2.070422 Second.