Aluminium Oxide Blasting Media Middle East

Check whether each pump is operating normally by listening, seeing, touching and sniffing(aluminium oxide blasting media middle east). Only after receiving a shutdown command from the main control room of the mine washing plant can the machine be shut down(aluminum oxide blasting grit). After the pump starts and runs normally, start the second Stage pump, and then open the outlet valve of the second stage pump. 

Aluminium Oxide Blasting Media Middle East MOQ: 1 Ton! 19 Years Experience Aluminium Oxide Blasting Media Supplier, 35,000m² Workshop Area, Free Samples, Fast Delivery!

If you want to buy aluminium oxide blasting media, please click our products: Brown Fused Alumina or White Fused Alumina for more information!

Equipment shutdown(aluminium oxide blasting media middle east): After receiving the shutdown command (the pump and pipeline must be flushed with clean water before shutdown, the flushing time is determined by the length of the pipeline), first close the outlet valve, then stop the motor, then close the pressure gauge and suction valve, disconnect the equipment power supply, and check Whether various pipelines are unblocked(aluminium oxide blasting grit). 

Shutdown program After receiving the shutdown command, close the outlet valve, first stop the host and then close the inlet valve, close the auxiliary equipment, and disconnect the main power supply of the equipment(aluminium oxide blasting media middle east). When the equipment is shut down, always check whether various pipelines are unblocked(alumina grit). The safety protection device was removed before it was put on the dress, causing injury to the inspectors.

The two motor shafts have an inclination angle relative to the screen(aluminium oxide blasting). Before starting the equipment, close the outlet gate valve and start the motor, and open the outlet valve when the normal pressure of the equipment reaches the specified value(aluminium oxide blasting media middle east); when the equipment is running in series, first start the first stage pump and open the outlet valve(silicon carbide grit). Observe whether the readings of various meters reach the index value. 

If an abnormal situation is found, it should be shut down immediately and replaced with a spare pump(150 grit aluminum oxide). During outdoor wiring and lighting installation operations, avoid touching other live facilities. When working on site, it is necessary to ensure that the circuit is unblocked and there is no leakage(aluminium oxide blasting media middle east). When starting the thickener or pump body, ensure that the oil level is moderate before starting the equipment(aluminum oxide abrasive powder).

For series operation, the second stage pump should be stopped first(aluminium oxide blasting media middle east). After the second stage pump stops, the first stage pump should be stopped, the pressure gauge and suction valve should be closed, the auxiliary equipment should be closed, and the main power supply of the equipment should be disconnected(aluminium oxide abrasive grit). When it is not used for a long time, the shaft seal should be cleaned to prevent rust and blockage. 

Start up and hand over the shift, do a good job in the sanitation of site equipment, carefully fill in the shift handover record, and hand over the shift with the successor at the post(aluminium oxide blasting media middle east). Tighten the loose bolts, make up the damaged ones, and replace the ones with serious wear(120 grit aluminum oxide sandblasting media). When a piece of equipment fails, you can immediately press the "stop" button, stop the machine for processing, and switch to a standby pump.

When the sliding line is installed and working at heights, the ladder must be erected stably, and the safety belt shall be fastened to prevent falling from heights(silicon carbide powder). It should be checked whether the equipment is in good condition and whether the lines and pipelines are unblocked(aluminium oxide blasting media middle east). The ore and mud are stirred in the slurry making section and separated in the screen section, so as to achieve ore washing and separation(aluminium oxide sandblasting grit). 

Shutdown and shift handover(220 grit aluminum oxide blast media): after receiving the shutdown signal, stop according to the shutdown procedure, do a good job in the sanitation of the production site and equipment, carefully fill in the shift handover record, and handover with the successor at the post(aluminium oxide blasting media middle east). When a piece of equipment fails, you can immediately press the "stop" button, stop the machine for processing, and switch to a standby pump.

Check whether each pump is operating normally by listening, watching, touching, and oh(pink aluminum oxide). The linear vibrating screen is mainly composed of a screen box, a screen frame, a screen mesh, a vibrating motor, a motor base, a vibration damping spring, and a bracket(aluminum oxide sandblasting media). Treatment method the thickener shall be loaded at a moderate speed(aluminium oxide blasting media middle east). The device can be started only after sending out the signal and receiving the command.

Under the combined force of the exciting force and the material's self-gravity, the material is thrown up on the screen to move forward in a straight line, so as to achieve the purpose of screening and grading the material(aluminium oxide blasting media middle east). Adjust the opening size of the jaw plate according to the block size required by the process(180 grit aluminum oxide). The solid concentration discharged from the underflow of the thickener shall not be less than 30%. 

Before starting the pump body, the air must be removed or the shaft seal water must be opened for cooling(glass bead abrasive). The motor drives the cylinder to rotate through the driving device(aluminium oxide blasting media middle east). When the cylinder rotates around the axis according to the specified number of revolutions, the ore and mud installed in the Jane fall or roll down freely with the cylinder wall rising to a certain height under the action of centrifugal force and friction(alumina abrasive).

If the equipment paint falls off and rusts, it shall be derusted and painted(aluminium oxide blasting media middle east). In case of fire, call "119" fire alarm number immediately, inform the location, fire situation and burned materials, and send personnel to pick up the fire truck at the intersection. Before starting the slurry pump, the shaft seal water pump was not started, causing the slurry pump to burn out(steel shot abrasive). Stand in a safe position before starting the equipment. 

Then repair or replace the damaged screen, and replace the seriously worn tensioning plate and pressing plate(sponge media abrasive). For equipment commissioning, jog commissioning first, and then run at full speed after confirming that it is normal. Monitor whether the equipment is in balance and check the water seal of the packing(aluminium oxide blasting media middle east). Too fast slurry injection causes muddy running in the thickener and low underflow concentration(aluminium oxide sand). 

The uneven regulation of ore washing tailings causes serious muddy running in the thickener(aluminium oxide blasting media middle east). Treatment method: the thickener should always pay attention to patrol the thickener and adjust the ore washing tailings. Insufficient flocculation dosage or insufficient stirring leads to low concentration of overflow layer and underflow(alumina sand). Treatment method: before starting the slurry pump, the shaft seal water shall be opened for cooling.

Start up procedure screw pump → slurry pump when starting up, the operator shall keep a half arm distance from the power box, close the power switch of the pump(garnet blasting media), turn the working system selection switch to the "manual" position, and do not use too much or too fast force when closing the power switch and working system switch(aluminium oxide blasting media middle east). The treatment method and flocculant addition shall be appropriate(aluminum oxide 80 90 grit). 

When the thickener was shut down for a long time, the underflow was not drained, and the flushing water was not started to flush the pipeline, resulting in serious blockage of the pipeline(70 grit aluminum oxide). Treatment method: when the thickener is shut down for maintenance for a long time, the slurry must be discharged first(aluminium oxide blasting media middle east). When starting, the flushing water must be opened to flush the pipeline to ensure that the pipeline is unobstructed.